Welcome, Guest. Please login or register.
September 28, 2024, 10:12:28 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  IGT S+ Double Diamond Will Not Go Into Test Mode		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: IGT S+ Double Diamond Will Not Go Into Test Mode  (Read 4092 times)
Sherrie
Guest
« on: November 19, 2012, 08:56:09 AM »
On an IGT S+ Double Diamond machine when powered on the Bill Validator powers up fine but the lights will not come on and it will not even try to accept bills, when a coin is inserted in the coin slot it just falls through and will not register and when the test mode button is pushed it will not go into test mode; absolutely no numbers show up in any of the LED displays.  The machine was fully functionable until this happened.  I ruled out the power supply since the BV powered up.  Could this be a blown fuse or the MB battery is bad?  No error codes ever showed up before this happened.
Thank you,
Sherrie
Logged
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #1 on: November 19, 2012, 01:07:26 PM »
When the machine has power, do the reels feel "stiff" or difficult to turn?  Compare them to how they feel when the machine is turned off.  If the reels feel the same when you try to turn them no matter if the machine is off or on, then your MPU is not getting power.

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #2 on: November 19, 2012, 06:19:39 PM »
Check the power connector behind the hopper to the motherboard from the power supply. They heatup and burn the connector you will see a dark burn mark most of the time on the molex connector. Clean and tighten the connector and you will be fine.

* capture_11.jpg (808.81 KB, 1280x800 - viewed 319 times.)
« Last Edit: November 19, 2012, 06:40:29 PM by coorslight115 » Logged
Ron (r273)
NLG Welcome Wagon & General Chat
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 401
Offline Offline

Gender: Male
Posts: 1819
« Reply #3 on: November 19, 2012, 06:38:04 PM »
Quote from: coorslight115 on November 19, 2012, 06:19:39 PM
Check the power connector behind the hopper to the motherboard from the power supply. They heatup and burn the connector you will see a dark burn mark most of the time on the molex connector. Clean and tighten the connector and you will be fine.

To add to coorslight115 the plug burn is usually on the back side so you have to pull it and turn it around.
(See coorlight115 photo)

Ron (r273)
« Last Edit: November 19, 2012, 06:45:10 PM by r273 » Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #4 on: November 19, 2012, 06:41:35 PM »
I added the picture to my earlier response.
Logged
Sherrie
Guest
« Reply #5 on: November 19, 2012, 11:02:07 PM »
The reels move freely both on and off.  The slot machine is not at my house so I will check tomorrow to see if that plug is burnt.  But if the reels moving freely means the MPU is not getting power, please let me know if that is a different power source than shown in the photo so then I'll check everything at once.  So do I rule out blown fuses or bad MB battery?
Thank you,
Sherrie
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #6 on: November 19, 2012, 11:04:20 PM »
If it was working fine and just stopped one day....99% chance it is that plug..happens a lot  !
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #7 on: November 20, 2012, 10:18:58 AM »
Agreed with the others. See this post for more information:

http://newlifegames.net/nlg/index.php?topic=14163.0
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.134 seconds with 20 queries.