Welcome, Guest. Please login or register.
November 22, 2024, 07:31:31 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  double diamond problem		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: double diamond problem  (Read 3444 times)
greghig
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 16
« on: November 26, 2012, 04:03:34 PM »
Trying to repair an IGT DD. No power, burnt connector (common), comes on now but still acted strange.  Did a reset using the (reset chip) which requires pressing the white reset button to activate it. All expected numbers poped up with no errors. When I replace the orginal ROM chip and boot I get the error "60" which is normal. The problem I have is the white reset button does not work now, so I cant get it to 60-1. The button is ok cause it allowes me to do a reset with the reset chip plugged in. But I cant get past the 60 error. It just acts like the reset button is not there (with the ROM chip). Battery is good. No DBA. Has anybody seen this or have any ideas?

greghig
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #1 on: November 28, 2012, 04:41:38 AM »
Quote from: greghig on November 26, 2012, 04:03:34 PM
When I replace the orginal ROM chip and boot I get the error "60" which is normal.

No, that's not.  Are you getting an error 60, or 61?  61 is normal -- I have no idea what 60 might be telling you.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
greghig
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 16
« Reply #2 on: December 03, 2012, 05:49:17 AM »
Sorry, You are correct. was not paying attention i guess. The error code is a 61, not a 60. One more interesting tidbit, when I turned it on today to verify the error number I got hit with the error 12. Replaced the battery and now im back to 61 again. If I turn the 'reset key", I can go through the last played figures so its not locked up, Just cant get the reset button to work to get to the 61-1. Once again, the reset button DOES work when using the reset chip, so its not the button.  Very fustrateing.

greg
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #3 on: December 03, 2012, 10:19:09 AM »
When you say you used the "reset chip", what chip are you talking about? You may be stuck in a "61 loop" which will require the use of an IVC123 clear chip. Is that the chip you've been using?  Try it again now that you've gotten the error 12 to go away.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
greghig
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 16
« Reply #4 on: December 04, 2012, 04:18:22 AM »
Got it resolved. Youre not going to believe what it was. My bench (like many benches) is well lit. What was happening was with the door open, the bright lights were triggering the door photocell. Making it think the door was still closed, (thereby disableing the reset switch). Simply turning off the lights in the room did the trick. Thought I would post this as it took two weeks to figure it out and might by chance help somebody out.

Thanks for the suggestions.
greg
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #5 on: December 04, 2012, 04:41:27 AM »
Wow, that's a new one. Congrats on figuring it out.
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: December 04, 2012, 12:51:06 PM »
Bright lights in a room keeping a door receiver optic circuit closed while the machine's door is opened?  arrow
I have never heard of that?
THAT'S a new one indeed!
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.106 seconds with 20 queries.