Welcome, Guest. Please login or register.
November 21, 2024, 03:54:07 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  Atronic
| | |-+  Clearing Memory		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Clearing Memory  (Read 9151 times)
kuffa
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 11
« on: December 02, 2012, 01:52:26 PM »
I have a Atronic Cashline machine Zodiac Magic and I think it will run fine if I can clear the ram.  What I was wondering is if anyone has or knows where I can find the CLEAR-EPROM chip and the Config EPROM chip for this machine?  Any help will be much appreciated. 
Logged
turniphead
NLG Member 101 to 500 Post
***

Total Karma Storms: 45
Offline Offline

Gender: Male
Posts: 121
« Reply #1 on: December 02, 2012, 03:05:18 PM »
dongle and correct software on your laptop with correct DB-9 cable are going to be needed first!  i can't help with them but you could post up in the classifieds for everything! g/l
Logged
turniphead
NLG Member 101 to 500 Post
***

Total Karma Storms: 45
Offline Offline

Gender: Male
Posts: 121
« Reply #2 on: December 02, 2012, 03:09:29 PM »
what are it's problems? maybe someone here can help!
Logged
kuffa
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 11
« Reply #3 on: December 02, 2012, 04:51:33 PM »
I am getting a COMM ERROR when I power up machine.  Everything seems to start up but I can't play machine, it just keeps saying COMM ERROR. 
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #4 on: December 02, 2012, 05:51:26 PM »
Is this the first time you powered the machine up?  or did the machine work fine before this happened.
Logged
kuffa
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 11
« Reply #5 on: December 02, 2012, 08:21:34 PM »
It is the first time I powered up the machine.  I have yet to see it work but like I saw I think it would run if I can clear that COMM ERROR.
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #6 on: December 02, 2012, 08:38:44 PM »
Well, I suspect it was set up to communicate with the Casino server so until you clear the memory and set the machine back up you are stuck. 
Logged
kuffa
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 11
« Reply #7 on: December 04, 2012, 03:16:28 PM »
So to clear the memory I just need a CLEAR-EPROM chip?  Do I need anything else and do you know where I could find one?
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #8 on: December 04, 2012, 04:20:19 PM »
I think you may need the infamous dongle...you can clear it with a Clear chip without the dongle, but you will need to perform the set-up afterwards, which you cannot do without the dongle...

Contact Blueridge (vendor on here), he had the dongles a few months ago.
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
turniphead
NLG Member 101 to 500 Post
***

Total Karma Storms: 45
Offline Offline

Gender: Male
Posts: 121
« Reply #9 on: December 06, 2012, 04:43:43 AM »
I think I remember reading that atronics have a comm board clear procedure too. Maybe that's all you need to do?
Logged
slottechfort
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 24
« Reply #10 on: December 06, 2012, 06:02:02 AM »
not sure if u tryed this already.. when the machine is powered up and all doors read close.. try just turning your reset key to show the diagnostic menu and then just turn key back to exit the menu ... if that doesn't clear your error... try just a soft ram clear... by turning game off.. then when powering back up hold the (red) reset button till u hear a loud ding sound come from the machine... then try what i said the 1st time again...
Logged
kuffa
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 11
« Reply #11 on: December 10, 2012, 01:06:34 AM »
Thanks for all the help, machine still not working going to try to get dongle.  Will let you know if I get it working.
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #12 on: December 10, 2012, 11:45:23 AM »
Not too sure about the Cashline, but the Emotion does not need a dongle to set the machine up unless it is a progressive game.  The Emotion uses a set of 3 chips for clearing the machine.  1 is for the game board and the other 2 are for the Comm board.  Many games don't use a comm board so all that is needed is the single clear chip for the game board.  I think Jim at Blueridge may have what yo need to clear the machine and set it up.
Logged
kforeman
Today...Slot Tech Tomorrow...Still be a Tech
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 42
Offline Offline

Gender: Male
Posts: 378
« Reply #13 on: December 10, 2012, 03:23:15 PM »
Quote from: slottechfort on December 06, 2012, 06:02:02 AM
not sure if u tryed this already.. when the machine is powered up and all doors read close.. try just turning your reset key to show the diagnostic menu and then just turn key back to exit the menu ... if that doesn't clear your error... try just a soft ram clear... by turning game off.. then when powering back up hold the (red) reset button till u hear a loud ding sound come from the machine... then try what i said the 1st time again...

 Agree with Post soft ram is a good idea but probably goign to need to clear and config. g/l
Logged
Now You're Techin'!!!
slottechfort
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 24
« Reply #14 on: December 13, 2012, 03:56:53 AM »
Quote from: kforeman on December 10, 2012, 03:23:15 PM
Quote from: slottechfort on December 06, 2012, 06:02:02 AM
not sure if u tryed this already.. when the machine is powered up and all doors read close.. try just turning your reset key to show the diagnostic menu and then just turn key back to exit the menu ... if that doesn't clear your error... try just a soft ram clear... by turning game off.. then when powering back up hold the (red) reset button till u hear a loud ding sound come from the machine... then try what i said the 1st time again...


thanks @kforeman soft rams have fixed allot of my cashline problems on my slot floor ....

 Agree with Post soft ram is a good idea but probably going to need to clear and config. g/l
Logged
next_gaming
New NLG Member 1 to 100 Post
**

Total Karma Storms: 6
Offline Offline

Gender: Male
Posts: 50
« Reply #15 on: December 13, 2012, 04:38:11 AM »
Hello


The commboard clear eproms are used in some cashline games whit n68k comboard if do you use accounting system or progresivve do you need or you can disable the commboard, after a clear, if do you want to keep settings do you need a ram clear whit checksum 56f0, whit this after the clear the machine ask to you if you agree whit settings if not you can start a new configuration if you don`t need commboard in the option commboard required set to "no" and don`t change the other options, maye this helps.


Best Regards

Next
Logged
kuffa
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 11
« Reply #16 on: January 12, 2013, 09:59:00 PM »
Hello again, I am still having issues.  I tried a Clear Ram and I think I have the wrong chip.  I am now getting error - CONFIG CRC ERROR and I know I should be getting a RAM ERROR message. 

My question is does anyone know what CLEAR RAM chip goes to this machine?

Atronic Zodiac Magic
Serial  # 11021201
Model # TASTV1CL64P
Date of Mfg is 05-03

Or is there a way to find out what chip number goes to this machine?

Thanks
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.084 seconds with 19 queries.