Welcome, Guest. Please login or register.
April 20, 2024, 01:03:24 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Electromechanical
| | |-+  Bally Triple Bell 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally Triple Bell  (Read 7595 times)
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« on: December 21, 2012, 05:10:18 AM »
Hello.

Im looking for a manual for my Bally Triple Bell.

Dose any one know where to find them or

dose any one have one???

I just got it and it is only working part ways....

A new add to my game room...

It will take dimes and nickels but the quoters will just drop through...

It all spins fine...

Pay out wont pay out when you hit a pay on the pay line...

Any help would be great...

I got it for 100.00 on craig's list....

Is this a good find??????

* 100_4764.JPG (506.5 KB, 2048x1536 - viewed 288 times.)

* 100_4765.JPG (532.2 KB, 2048x1536 - viewed 266 times.)
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #1 on: December 21, 2012, 05:12:20 AM »
more pics

* 100_4766.JPG (495.19 KB, 2048x1536 - viewed 261 times.)

* 100_4774.JPG (515.69 KB, 2048x1536 - viewed 325 times.)
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #2 on: December 21, 2012, 05:14:39 AM »
in side pics

* 100_4762.JPG (494.68 KB, 2048x1536 - viewed 241 times.)

* 100_4759.JPG (523.05 KB, 2048x1536 - viewed 289 times.)
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #3 on: December 21, 2012, 05:16:23 AM »
more inside pics

* 100_4757.JPG (506.38 KB, 2048x1536 - viewed 268 times.)

* 100_4761.JPG (491.62 KB, 2048x1536 - viewed 268 times.)
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #4 on: December 21, 2012, 05:18:07 AM »
more pics

* 100_4763.JPG (497.32 KB, 2048x1536 - viewed 242 times.)
Logged
Mark
OldReno
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 175
Offline Offline

Gender: Male
Posts: 818
« Reply #5 on: December 22, 2012, 06:20:54 PM »
$100.00?  Wow, a steal!!!  Pretty slick machine, congrats to you.
Logged
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #6 on: December 22, 2012, 06:52:46 PM »
Thank you...

I got it some what working...

took off that vinel stuff on the out side and found the orignal desinge and paint under it...

* 100_4791.JPG (485.76 KB, 2048x1536 - viewed 247 times.)

* 100_4792.JPG (493.13 KB, 2048x1536 - viewed 246 times.)
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #7 on: December 22, 2012, 06:55:52 PM »
Im going to repaint the orignal design back on it....

im still looking for some type of manual that tells me what dose what and gives me more info on it...

here is a pic of what it looked like when they first came out with this machine in 1946

* 126A_med.jpeg (352.52 KB, 428x600 - viewed 253 times.)
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #8 on: December 26, 2012, 06:52:19 PM »
Any help on finding a manual???

I need to find some thing on this old machine..

If any one has any info please let me know...
Logged
Mark
Jeff99
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 56
Offline Offline

Gender: Male
Posts: 103
« Reply #9 on: January 06, 2013, 02:32:34 PM »
I have a draw bell that I have been very slow on fixing.  Needs new glass and cant find it.  May I suggest you take that glass to a place with a big flat bed scanner and get its picture taken, both side,  as you won't find a replacement if it breaks.

The documentation I found from http://www.gameroomantiques.com/ wasn't very good as it was a nth generation photocopy.

It may or may  not have replay capabilities, these are jumper that in mine are towards the bottom of the machine.  I can take some pics if you need.

Now take a big jump - This machine is a hold and draw mechanism without the hopper payout board.  The same reel mech is used in the Bally 802, all they did was take the handle and put on front of the mech, everything else is the same.  The rest of it is just a series of stepper switches that count coins and counters to operate the coin payout solenoid.  It looks much like a 5 coin feature unit with a coin count stepper and odds follower unit. stir the pot / get cooking
Regards,
Jeff
Logged
Jeff
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #10 on: January 06, 2013, 02:38:32 PM »
See if this helps

http://rwatts.cdyn.com/download/bally_triple_draw_bell/
Logged
One step at a time.
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #11 on: January 06, 2013, 06:23:28 PM »
Quote from: Jeff99 on January 06, 2013, 02:32:34 PM
I have a draw bell that I have been very slow on fixing.  Needs new glass and cant find it.  May I suggest you take that glass to a place with a big flat bed scanner and get its picture taken, both side,  as you won't find a replacement if it breaks.

The documentation I found from http://www.gameroomantiques.com/ wasn't very good as it was a nth generation photocopy.

It may or may  not have replay capabilities, these are jumper that in mine are towards the bottom of the machine.  I can take some pics if you need.

Now take a big jump - This machine is a hold and draw mechanism without the hopper payout board.  The same reel mech is used in the Bally 802, all they did was take the handle and put on front of the mech, everything else is the same.  The rest of it is just a series of stepper switches that count coins and counters to operate the coin payout solenoid.  It looks much like a 5 coin feature unit with a coin count stepper and odds follower unit. stir the pot / get cooking
Regards,
Jeff


Yes please send me some pics...

im restoring the paint and everything right now,

thanks for the info.
Logged
Mark
Jeff99
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 56
Offline Offline

Gender: Male
Posts: 103
« Reply #12 on: January 06, 2013, 08:05:17 PM »
I am a terrible painter can you point me to something on how to repaint these machines?

Enclosed are two photos, If you want fullsize tell me and I will dropbox them to you.
Regards,
Jeff

* draw-bell-small-1.jpg (90.47 KB, 800x600 - viewed 254 times.)

* draw-bell-small-2.jpg (97.49 KB, 800x600 - viewed 249 times.)
Logged
Jeff
OldReno
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 175
Offline Offline

Gender: Male
Posts: 818
« Reply #13 on: January 06, 2013, 10:31:54 PM »
Cool Pic!!!
Thank you.
Logged
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #14 on: January 07, 2013, 08:42:23 PM »
Yes very nice pics thank you...

I can post some pics of the inside of mine if you need me to...

Can you e-mail me some bigger pics of what you have???

Thank you..
Logged
Mark
drfreeze1739
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 16
Offline Offline

Gender: Male
Posts: 432


drfreeze1739@sbcglobal.net
« Reply #15 on: January 07, 2013, 08:47:27 PM »
Quote from: Jeff99 on January 06, 2013, 02:32:34 PM
I have a draw bell that I have been very slow on fixing.  Needs new glass and cant find it.  May I suggest you take that glass to a place with a big flat bed scanner and get its picture taken, both side,  as you won't find a replacement if it breaks.

The documentation I found from http://www.gameroomantiques.com/ wasn't very good as it was a nth generation photocopy.

It may or may  not have replay capabilities, these are jumper that in mine are towards the bottom of the machine.  I can take some pics if you need.

Now take a big jump - This machine is a hold and draw mechanism without the hopper payout board.  The same reel mech is used in the Bally 802, all they did was take the handle and put on front of the mech, everything else is the same.  The rest of it is just a series of stepper switches that count coins and counters to operate the coin payout solenoid.  It looks much like a 5 coin feature unit with a coin count stepper and odds follower unit. stir the pot / get cooking
Regards,
Jeff


If you need a good pic of my glass let me know...
Mabey i can help you out since yours glass is broken.

My dad knows some one who dose trasparent Labels so o might have him see if he can do some for mine.
Then all i will have to do is buy some new glass and put the new transparent labels on them and keep the old glass put away...

My glass is in pretty good shape just some flacking silk screen on some parts.....
Logged
Mark
Jeff99
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 56
Offline Offline

Gender: Male
Posts: 103
« Reply #16 on: January 07, 2013, 10:07:00 PM »
Thanks,
But mine is just a a single coin drawbell which is much smaller than yours.
Jeff
Logged
Jeff
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 19 queries.