Aristocrat problems

[Mark1505]

I have two Aristocrat machines. One's made in 94 and the other made in 96. I have the manuals and have read how to clear on older post.
I have two key switches on both machines. They are all spring loaded and return back when you let them go. First questions is this correct or should they stay turned.
I can not seem to get into any type of different screen. Turning the key, holding them , pushing any of the button.Has anyone had this problem.
Thanks for the help
Mark

[proten]

You will need the switches to stay turned.
I removed the two key switches and replaced
them with plain toggle switches temporally.
Then you can go though the setups with out
two extra hands.

[Mark1505]

after working on the machine and not getting any where, I found a broken wire to the reset switch.
If I turn the reset switch I can get in the meter screen. I can move through all 3 screens, seems to be working correct.
If I hold the switch or let it go it makes no difference. I have held the switch and press the three right buttons and the three left buttons.
turn both switches and pushed the buttons. what am I missing? this is my first Aristocrat machine.

[proten]

   so we know that we are working on the same machine.

Here is the reset steps I use to rest my MK IV.

[Mark1505]

Thanks, I got it up and running. It's all working except the bill val. I will start working on this problem.