Welcome, Guest. Please login or register.
November 23, 2014, 06:02:26 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  SB001000 in a S2000?
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: SB001000 in a S2000?  (Read 1177 times)
wireless73
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Posts: 37



« on: January 11, 2013, 06:46:32 PM »

New issue has come up.  Last night I got to the point of being able to put money in this machine and use it after a clear and key.  After 25 or so no wins the machine lands on this bar - 7 - bar and pays me 20 credits.  The machine is set to .25 denomination and I was playing the max 2 credits.  First I thought this was odd because the glass does not show a "20" credit win anywhere.  Second why pay on a bar - 7 - bar.  This got me to read in to my SB chip and SG chip.  Can someone tell me if these chips are correct?  Based on what I read so far I don't have a S2000 SB chip in this machine.  If these chips are not correct, can someone layout what chips I should have - in addition and if it matters - I would like to set this up as a four denomination choice if I am going to have to replace one (or more?)

SB001000
SG000312
VS011GX0


* IMG_20130109_212919_518 copy.jpg (846.59 KB, 3264x1840 - viewed 67 times.)

* CapturFiles-Jan-11-2013_20.01.39.jpg (57.45 KB, 287x442 - viewed 68 times.)
Logged
blueridgeslots
703 730-0821
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1262
Offline Offline

Gender: Male
Posts: 1779


703 730-0821


WWW
« Reply #1 on: January 11, 2013, 06:53:37 PM »

The reels probably were nudging up and down too..... 

That is because you have a Double Diamond Deluxe SS Chip installed

Not 2cm Triple Cash, you should have something like a SS6220 in there

http://www.newlifegames.net/igtbible/IGT%202CM/Game%20Library%20-%20S-Plus%20-%20Triple%20Cash%20%282%20Coin%20Multiplier%29.htm


But the easiest thing would be to scrap the SB1000 and SS chip and get a SB100074 and be done
Logged

Selling Quality Tested and Guaranteed Slot Parts and Machines at Wholesale

http://stores.ebay.com/BLUE-RIDGE-SLOT-SERVICE
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #2 on: January 11, 2013, 07:28:04 PM »

Can't he just get the correct SB chip and ditch the SB001000 and SS chips?
Logged
blueridgeslots
703 730-0821
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1262
Offline Offline

Gender: Male
Posts: 1779


703 730-0821


WWW
« Reply #3 on: January 11, 2013, 09:05:10 PM »

Hmmmmmm.... didn't my last sentence mention that with correct SB number?
Logged

Selling Quality Tested and Guaranteed Slot Parts and Machines at Wholesale

http://stores.ebay.com/BLUE-RIDGE-SLOT-SERVICE
wireless73
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Posts: 37



« Reply #4 on: January 11, 2013, 11:21:40 PM »

Thanks Blue.  I will try to find a SB100074 out there for sale.  If that takes care of the SB, do I need to replace the SG1 and SG2 chips with something else as well?
Logged
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #5 on: January 11, 2013, 11:30:05 PM »

I would update to SG000598 or at least SG000363
t will eliminate the WAMM or IPC problem
363 and 598 auto config for WAMM
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #6 on: January 12, 2013, 05:28:44 AM »

Hmmmmmm.... didn't my last sentence mention that with correct SB number?
Crap, sorry Blueridge,  don't know how I missed that. Got in a hurry I guess...
Logged
wireless73
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Posts: 37



« Reply #7 on: January 24, 2013, 07:13:53 PM »

Hello all.  here is where I am at with these chips.  I replaced my SB001000 with SB100074.  I replaced the SG's SG000312 with SG000598 (both 1 of 2 and 2 of 2).  I also replaced my version chip VS011GX0 with VS011GX1.  I ran through the S2000 RAM CLEAR and KEY SET UP FOR HOME USE S2000 posted by STAZ in another thread.  I get to the point of "Remove the MPU, ground yourself, replace the Key Chip with your SB Chip and return the board to the machine.  While leaving the door open, power the machine back on.  After the machine cycles, you should receive a message on the door LED that reads "7 KEY CHIP CONFIG".

I don't get the 7 key menu option, the machine will do one of two things  - 50% of the time each.  1) The display will read like it is up and running fine (less a bill validator error) or 2) EEPROM Error.

Two questions:  I have a S-Plus Reel (120NS) MECH SS4252 installed still.  This appears to be wrong.  Should my machine work with this chip?  If so then 2) how can I tell which EEPROM has the error?  I was thinking of replacing the 598 SG's with 523's but didn't know if I should spend the time on doing that or buying some MECH chips and finding the right one.  Everything is seated correctly and I have gone through the clear and key process 2x with the same results.  There are no credits in the machine.      Thanks for any suggestions.
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #8 on: January 24, 2013, 07:23:56 PM »

With the SB100074 installed the ss chip has to go. The SB eliminated the need for the ss and that's probably what's causing your eprom error
Logged
wireless73
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 10
Offline Offline

Posts: 37



« Reply #9 on: January 24, 2013, 07:48:36 PM »

Thanks for that tip cowboy.  Below was my process and I feel like I should start with different fresh chips, but using all the same SB's, SG's and version.  This time I will do everything without the 4252 chip installed on the board.  One other question - when I do the clear and key should I (or can I?) still use a 224 clear and a 45 key?

Turned off machine
Pulled MPU
removed the SS4252
reseated the board
turned the machine on and left the door open
Testing memory displayed
Alarm sounded
turned reset key one time and message EEPROM CRC FAILURE -0x1 displayed
turned the key again and got NON-RECOVERABLE DATA ERROR
shut off the machine and wrote this post.

Thanks
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog


« Reply #10 on: January 24, 2013, 07:59:02 PM »

Jackpot key would of carrried you through
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2014


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.174 seconds with 20 queries.