Player"s Edges Eproms + programme + duart missing

[quentinvip]

Helllo, I'm french , i'am new on your Forum.

I want to buy I.G.T Player's Egde motherboard but some components are missing ... ( See the picture ).

Eproms , program and duart?

It Is possible to find it or buy it for remplace this , and where ?


Sorry for my bad English ...   


Thaks a lot

Quentin

[jay]

Bonjour,

Your english is better than my francis.

You are missing the "game set" - this is 6 or 7 chips depending if you have a regular board or superboard.

It contains 4 graphic chips MXO, MRO, MGO, MBO
The missing Uart is called a CAP PROM and it manages the colors.
On a superboard you would also need a Game Chip and Program Chip.
If this is a non-superboard you would only have the game chip.

Most of the vendors on our home page can sell a PE+ Game set consisting of these chips.

[quentinvip]

Okey thanks a lot.

And this card is Super or normal board ?

How can i know?

[quentinvip]

It's for this machine

[quentinvip]

 

[proten]

In the last photo it looks like some one put
a regular computer mother board in it.

[jay]

A super board has both a program chip and a game chip.
The non-superboard only has the one socket.

I think it's a superboard but could not zoom in enough to see the board labels.

Your machine is different than most here. Normally the bill valudator is on the right side through the Crome on the door and not through the belly glass. Your monitor also looks larger. Never saw those titles on your glass before either.

Most NA machines would have a JCM valudator - either DBV (dollar bill validator) or the newer WBA (World bill validator). The latter name is quite deceiving as to change country currencies you need to change chips and the bill head is different too.

[quentinvip]

Yes for the moment i put a computer motherbord with emulator MAME JOKER WILD POKER . Just for the moment while I find a real motherboard.

In my machine they are not any bill validator, just coin ajustable validator. I don't want to use bill validator.

I want repair this machine for my personal game room . To turn the machine next to my pinball.

Currently the machine works well but in an emulator. So I did not use the hopper.

It's still more fun when my machine distributes the gain.

I hope you understand my English :-)


Im my cab have just jamma connector.  I think trying to adapt the connector for connect my I.G.T card. Is possible ??


hank you for helping me this is really cool

[quentinvip]

Hello just a small Up . !! Thanks

[knagl]

I don't think this machine was ever a Player's Edge Plus.  There aren't enough buttons on the player panel (there should be 9 buttons: Hold 1-5, Bet One, Bet Max, Cash Out, and Deal/Draw).  Also, the connector with all the cut wires in IMG_1395.JPG isn't one that looks familiar to me as belonging to a PE+.