Welcome, Guest. Please login or register.
November 22, 2024, 06:58:13 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Change WBA 12 to WBA 13		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Change WBA 12 to WBA 13  (Read 1434 times)
genebopp
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Posts: 52
« on: March 06, 2013, 03:21:58 PM »
I have a Super Star Spin that currently works perfect.  The WBA 12 does not have the latest software.  It looks like updating it is cheap, but shipping it back and forth would cost more than I saw I could buy a WBA 13 for.  So I bought the WBA 13 for $30.  I figured I would see if what the WBA13 came with and buy it a new eprom if I needed to.  It showed up without a chip in it at all.  So it looks like I need to buy a chip.  If I buy a chip and swap it out do I need to calibrate it?  Will the machine just figure out that it has a new WBA and just work or do I have to do anything else?  Want to sell me the chip and or calibration paper, if I need it?
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #1 on: March 06, 2013, 07:33:53 PM »
Quote from: genebopp on March 06, 2013, 03:21:58 PM
I have a Super Star Spin that currently works perfect.  The WBA 12 does not have the latest software.  It looks like updating it is cheap, but shipping it back and forth would cost more than I saw I could buy a WBA 13 for.  So I bought the WBA 13 for $30.  I figured I would see if what the WBA13 came with and buy it a new eprom if I needed to.  It showed up without a chip in it at all.  So it looks like I need to buy a chip.  If I buy a chip and swap it out do I need to calibrate it?  Will the machine just figure out that it has a new WBA and just work or do I have to do anything else?  Want to sell me the chip and or calibration paper, if I need it?

Just pop in the proper chip and turn on game. Should take right off. If you get bill validator mis match open and close door a few times to clear it.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.1 seconds with 19 queries.