Welcome, Guest. Please login or register.
November 24, 2024, 08:22:25 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally 5000 plus slot machine needs help!!		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally 5000 plus slot machine needs help!!  (Read 11048 times)
threex5x7
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 8
« on: March 25, 2013, 09:24:58 PM »
Hello everyone and thanks in advance!

I just bought a Bally 5000 plus slot machine from eBay Germany tonight and I'm pretty happy with it.

There is a fault though.....

When I turn the machine on the florescent lights come on and that's it.

I have checked the three fuses below the MPU boards, all is good there. 

I removed the old memory battery (was completely dead) and have a temporary wired in a  3V lithium battery with no luck either.

The two LED's on the MPU do not flicker, flash, or otherwise power on when the machine is turned on. 

Pressing the Reset buttons on the MPU did nothing.

The attached photo of the slot machine is the way it sits powered on.  No LCD displays or fault codes.

Any thoughts or ideas?

* bally cabinet power on.JPG (102.05 KB, 640x480 - viewed 626 times.)

* bally mfr tag.JPG (138.49 KB, 640x480 - viewed 504 times.)
Logged
proten
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 210
Offline Offline

Gender: Male
Posts: 1130
« Reply #1 on: March 25, 2013, 10:39:43 PM »
If you un hide your email address in
the profile I will send you the Op manual.
Too big to post.
Logged
One step at a time.
theprocat
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 26
« Reply #2 on: March 26, 2013, 01:00:02 PM »
threex5x7 
 
Did you check your voltages at the power supply?  These 5000+ machines are noted for their poor power supplys.

Ron

PS:  Thanks for the eMail.  I'm sure it will help.
« Last Edit: March 26, 2013, 01:28:08 PM by theprocat » Logged
If all else fails, get a bigger hammer.
threex5x7
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 8
« Reply #3 on: March 26, 2013, 01:57:22 PM »
UPDATE 1:

First and foremost thank you very much for the reply and support from proten and theprocat!  Clap Clap

I opened up the power supply and found a significant amount of corrsion on the boards (see photos).

I am now in the market for a power supply.....any suggestions?  I would prefer to change the entire assembly out, not just the area where the corrosion is......

There is a sticker in the front of the power supply that reads:  AS-2982-11  (Part number I think....  Scratch Head ).

Now that I'm committed to this machine....anybody know where a reasonable priced keypad is?

Thanks again!!
Bobby

* bally pwr supply 1.JPG (151.78 KB, 640x480 - viewed 622 times.)

* bally pwr supply 2.JPG (150.68 KB, 640x480 - viewed 544 times.)
Logged
theprocat
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 26
« Reply #4 on: March 26, 2013, 02:21:13 PM »
Bobby,

lucky slots [azgamingslots@msn.com]  has an after market power supply that replaces yours.  I had similar corrosion on my unit.  I believe that little board is the power safe monitor.  Anyway, I desoldered it, cleaned and reinstalled.  All voltages were then correct, but I am going to change it to the newer replacement.

I was able to find a programmer on Ebay.  Kind of expensive (100 dollars), but I guess when you work on these old machines you need the tools.

Ron
Logged
If all else fails, get a bigger hammer.
theprocat
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 26
« Reply #5 on: March 30, 2013, 11:26:18 AM »
Bobby,

How are you doing with your 5000+ ? 

After doing a safe ram clear many many times, repairing the infamous "Black Box" power supply, checking voltages on all pc boards, cleaning everywhere, testing the optos on reel circuit boards, and finding that the ribbon cable between the I/O board and the reel control board was on backwards, my 5000+ now has a pulse and lives.

The strange thing is that the ribbon cable fits better the wrong way.  Bally used a socket on the I/O board that isn't keyed, so it is easy to push connector on the wrong way.

Ron
Logged
If all else fails, get a bigger hammer.
threex5x7
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 8
« Reply #6 on: March 30, 2013, 03:17:21 PM »
Ron,

I just ordered a replacement power supply and keypad last night from Lucky Slots. 

I will update after the parts arrive!

Glad to hear you have your machine has a pulse and lives again!! 

More details soon!!

Bobby
Logged
retroelectro
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Posts: 14
« Reply #7 on: April 06, 2013, 06:30:05 PM »
Fruit Loot? I got one too! Also had a broken power supply but I was able to fix it myself.

* IMG_2981s.JPG (215.95 KB, 750x1000 - viewed 739 times.)
Logged
Bally 5000+ Fruit Loot 1991
Sega Turbo Outrun 1989
Sega Outrun 1986
theprocat
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 26
« Reply #8 on: April 06, 2013, 07:19:44 PM »
Super.  Power supplies seem to be the biggest bad boy.  Glad to hear another 5000+ is going.   Clap
Logged
If all else fails, get a bigger hammer.
threex5x7
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 8
« Reply #9 on: April 22, 2013, 03:24:16 PM »
 Plastered Buddies Plastered Buddies Plastered Buddies

Final Update:

SUCCESS!!!!

Again thanks for all the info and input.  It has all worked out for the best......

I followed theprocat's advices and orderd a replacement power supply from LUCKY SLOTS  [azgamingslots@msn.com]. 

After several emails, the team at LUCKY SLOTS got me in the right direction.

Two takeaways here:
1.  If you have a Bally 5000 Plus spend the money on a keypad......best $25 bucks I ever spent.  You will want that keypad after you swap your power supply!
2.  When the need arises in the future I will look forward to working with LUCKY SLOTS. 

Thanks again!!!!
Time for a cold one and some slots!!!!!!!
 reels hit 7's Plastered Buddies cheers reels hit 7's

Threex5x7
Logged
theprocat
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 26
« Reply #10 on: April 22, 2013, 04:29:01 PM »
Super, another 5000+ going.  I have seven machines and like the 5000+ the best.  I have been gathering spare parts for mine, so if you need anything in the future, let me know and maybe I can help.   Clap

Ron
Logged
If all else fails, get a bigger hammer.
Kaasie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 1
« Reply #11 on: December 12, 2013, 08:06:38 AM »
Hi guys, I am new to American slot machines but I also have a 5000+ now. I really like the machine and read something about this keypad. Can you tell me more about it and is it possible to tweak/update software?

Thanks in advance,
Logged
theprocat
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 26
« Reply #12 on: December 12, 2013, 12:24:51 PM »
The keypad allows you to enter different parameters for the machine.  You can find one on Ebay once in a while. 
Logged
If all else fails, get a bigger hammer.
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.126 seconds with 20 queries.