S2000 Lamps

[Ed_milehi]

I have a S2000 with some bad led lamps/bulbs.  One is a 3 led wedge(?) type lamp and a post here points to http://www.americangaminginc.com/products/products.asp?CategoryId=1359&ItemId=76793 .  That bulb is a 12v and my bad bulb has 6v on it.
 

I also need some of the 1 led bulbs but there is no writing on them, anyone know which voltage I should be using or the correct part numbers to order and does the polarity matter when  the bulb is inserted?

[staz]

you should use 12v these are pretty good that are out there......

[staz]

heres where i got most of mine.....

https://www.superbrightleds.com/search/led-products/194%20LED%20Bulb%20-%204%20LED%20Wedge%20Base/

[Ed_milehi]

heres where i got most of mine.....

https://www.superbrightleds.com/search/led-products/194%20LED%20Bulb%20-%204%20LED%20Wedge%20Base/

Thanks for the link, so I should be using 12v rather than 6v?

[staz]

heres where i got most of mine.....

https://www.superbrightleds.com/search/led-products/194%20LED%20Bulb%20-%204%20LED%20Wedge%20Base/

Thanks for the link, so I should be using 12v rather than 6v?

yup i use 12v thats whats recomended......

[Britanski]

LED's are great replacements for incandescent bulbs.  They use less wattage and generate less heat, while getting more eye attention.   

I worked with LED's in the 80's and thought how great they'd be used in Automotive brake lights, etc...  but I'd rather not discuss that mi$$ed investment.     

Superbrightleds.com is a bit pricey per bulb ... Check ebay for T5/Wedge LED's in the automotive section ...  savings are great for bulk lots!   Be sure to look for U.S. distributors, not China.   
They're so cheap, you can buy many and experiment.  For example:
http://www.ebay.com/itm/20X-Flat-Ultra-White-6000K-37-58-70-73-74-T5-Dashboard-Gauge-1-LED-Wedge-Bulb-/170969313841?pt=Motors_Car_Truck_Parts_Accessories&hash=item27ce90b231&vxp=mtr
20 bulbs for $8.  I'm using 2 of these in my IGT candles.  Yes, the original candle bulbs have a wider base (T10) and are also available.  But I discovered that these smaller based bulbs can work. Just fan out the wire contacts on the base and play with the fitment... . . they can be made to work.
If you don't want to fidget with fitting, candle LED bulbs are the same as automotive T10 or 2825. 

[bindlesniff]

can any of you tech wizards out there start me on the right path with this problem......5 line pay s2000 double diamond,,,the 5 lamps that light as you progressivly put more coins in,,,dont light,,,,,also  the bv..those are leds....they dont light either..the bv works fine,,,,,,the coin in thing registers on the red flourescent display.....everything else seems to function ok,,except the machine is set on credit,,not cash,,,,,,which is an extra step as you put coins in,,then you have to push the bet 1 coin button the amount of times to register your bet,,,id like to change that to cash,,,,,the manula is a little vague for me..HELP!!!!....thanks  j stitt,,,,

[CVslots]

And this is a S2000?

If you try posting a new topic in the S2000 forum addressing your issues, I'm confident they aren't anything we can't help you with. 

[bindlesniff]

ooops..i thought this was the s2000 forum,,how do i get to that?,,thanks

[CVslots]

No problem. It can be confusing at first. There are tons of info on lamps in the S2000 forum!  :89-Here's a link! 

http://newlifegames.net/nlg/index.php?board=61.0