S+ Wild Cherry error 41

[miket]

I think that my issue is my No1 reel but I am looking for a second opinion. Every so often I get a code 41 and all three reels just spin slowly until I open and close the front door.
Would this most likely be all I need to replace?

Mike

[CVslots]

A 41 definitely indicates a problem with the first reel, however, problem is more than likely not with the actual reel or reel basket itself. Check harness moles plugs to be sure everything's connected well. Also, make sure reel is not rubbing or touching ANYTHING at all. The slightest rub on a nearby harness or wire bundle will cause it.

To further investigate, swap reel 1 with reel 2 (or 3) and see if error follows the reel or not. If, with rolls switched, still get a 41, then that would point towards a harness problem or something rubbing on the 1st reel position. If you get a 42 or 43 error, then that is when it would indicate there's a problem with the actual reel itself.

Good luck and report back!


Roslyn

[jay]

The other thing to look at is the corner of your S+ board. There is a bank of 5 resistors.
These represent each of the 5 reels. Most North American S+'s only ever used 3 reels but the board does support 5 with the right software.

IF one of the resistors looks burnt (in particular the first one) this is a common cause.
You can swap out resistor 1 for resistor 5.

[miket]

 
***UPDATE***
swapped reels around and each time I moved it the reel failed in the new location. I replaced the reel and have been problem free.....so far.

Thanks for all the help

[knagl]

Excellent news.  Great troubleshooting, and thanks for the follow-up message to let us know how you fixed the problem.