Welcome, Guest. Please login or register.
September 29, 2024, 02:20:39 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  S+ 3100 won't clear FIXED		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S+ 3100 won't clear FIXED  (Read 4050 times)
therockinelvis
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 99
Offline Offline

Posts: 518
« on: May 01, 2013, 10:41:17 PM »
I have a S+ that someone else messed with. Circuit board was installed while power on and it blew the board. I switched the chips to another board. Started out as the 61, I got it to 61-1 but turning the key did not do anything. I by-passed the door switch and the bv switch and then took the glass out for aligning the door optics. Still no change when turning the key. And yes the door was closed. Finally put the board in another machine and it cleared. Put it back in machine had the 65-1 then it acted normal and spun reels and was ready for play. Then there was a ding like it paid a coin and 3100 alternating with 1 displayed and 0 in coins played. I tried switching the hopper but 3100 will not go away. Does it need a CLEAR? Does anyone repair boards as my spare is now being used.

* board.jpg (720.33 KB, 2592x1456 - viewed 375 times.)
« Last Edit: May 04, 2013, 05:33:56 PM by therockinelvis » Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #1 on: May 01, 2013, 10:54:23 PM »
Check and make sure that there is nothing blocking the coin out optic inside the hopper or possible a coin is wedged in at the optic.
Logged
therockinelvis
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 99
Offline Offline

Posts: 518
« Reply #2 on: May 01, 2013, 11:04:19 PM »
I tried switching hoppers and the 3100 stays.
Logged
BR549 Auto Sales
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 499
Offline Offline

Gender: Male
Posts: 1903
« Reply #3 on: May 01, 2013, 11:09:04 PM »
sorry, missed that in your post
Logged
dale
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 60
Offline Offline

Gender: Male
Posts: 362
« Reply #4 on: May 01, 2013, 11:42:18 PM »
Did you open , then close the door and then turn the reset key?
Logged
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« Reply #5 on: May 01, 2013, 11:49:10 PM »
Does the candle go out after you close the door, or is it still showing door open?  If it doesn't detect the door closure, the 3100 will not clear.
If all else fails, then run the diagnostic tests to check the door optics and other switch's.  
Logged
therockinelvis
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 99
Offline Offline

Posts: 518
« Reply #6 on: May 02, 2013, 04:45:08 PM »
I put the board in another machine and it worked and reset. Put back in original machine but did not put hopper back in. I used the credit button on coin acceptor and played a couple spins. Them 3200 came up without a hopper. This machine had a progressive and has all kind of extra wiring not plugged into anything. Also on the back box where the board goes it has a keyed switch. I have never seen this before. It is not spring loaded like the reset.

* slot11.jpg (520.41 KB, 1456x2592 - viewed 322 times.)

* slot11-1.jpg (652.87 KB, 1456x2592 - viewed 299 times.)
Logged
therockinelvis
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 99
Offline Offline

Posts: 518
« Reply #7 on: May 04, 2013, 05:13:01 PM »
Finally found the problem with the optic's. Someone before me had replaced them and had them reversed. I switched the sensor's and like majic all reset. I can't believe it took so long for the wire colors to jump out at me. Another one for my trouble shooting book.
Logged
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« Reply #8 on: May 04, 2013, 06:38:58 PM »
Nice Job!  Clap applause +1 (Karma, or whatever)
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.086 seconds with 20 queries.