enhanced board reset

[scratchee35]

Good morning!!

i am trying to set up an enhanced board machine...i cannot get into the accounting part of the setup 7.1.1 i believe...i want the machine to accept quarters, and give me 25 credits. i can get into the 7.2 part for the coin denomination setup... i do this all the time with the regular boards, but cant with this enhanced for some reason

am using the 224 and 45 clear chips...one right after the other

the chips seem to be working, as i have cleared 1 other enhanced board, and was able to get into the accounting part to set it up as a quarter machine

im sure im doing something dumb, i just dont know what! lol

thanks for everyones help!!!

Steve

[qbert]

Are you sure that there are no credits on the machine?
If you still have any credits you will not be able to change anything in the 7.-- area.

[scratchee35]

well..i am pretty sure there wasnt, as i have tried 5 times to reset it, but wont swear to it lol....just for s&g's, im gonna redo it right now making sure theres not any..will report back

Steve

[scratchee35]

well crap...still no luck....here's what im doing:

install 224, 2 green lights immediately, 30 seconds later 2 yellows
install 45, 2 green lights immediately, 3 seconds later 2 yellows
install sb game chip, door opened, key flicks, button pushes, close door, key 7 settings appear

enter to 7.1.1 denomination will not let me enter...
enter skips right to 7.1.1.2 coin denomation...lets me enter game denomation

what in the heck am i doing wrong?

have to run for an hour or so but ill be back..

thanks!!!

Steve

[CVslots]

Just a thought, what style software is in that game?   Does it have eproms or an R board (piggyback board) on the MPU? An R board would require a different Clear/Key chip...

[scratchee35]

sorry it took me so long to get back to you...i had to do some running before the places closed

the sg's are 598  with "L" in the far right corners...

the version is vs009sxo  with a "R" in the far right corner

the dsp is dspl0002  with a "R" in the far right corner

this means i need a different clear chip?

thanks!!!

oops...i forgot the sb is 100927 with an "L" in the right hand corner
game is a 5 reel 9 line triple red hot 7

[idesign]

Why are you using 598?  The PSR says is must be used with  VS011GX0 or VS011GX1.

[scratchee35]

ok..here is the modified version...

its working!!!!

reading down, youll see i changed the version chip...then i got the blinking light...well, just like i used to tell my ex-wife, if i push hard enough it will go...i didnt have the board in all the way i guess...anyways, after getting that, i redid the chips, and now it works!!!

still not sure if i should have chnged to the sg363 but i can do that at a later time if needed

thanks again for everyone's help...is very appreciated!!!

lol..coz those are what was on the board when i got the machine goofy!!  
the machine works great with these chips so i left them alone...all i wanted to do is make it a penny machine using quarters to give 25 credits for each coin drop...i do that to the regular boards all the time, and then put a quarter or nickle hopper in them

ill see if i have the chips you listed, if not ill scrounge for them i guess

if i have them, ill change and do the reset, then ill post the results

thanks!!!

ps....i found a 11gx1 chip...should i change the sg chips out to 363, like i normally use for a regular board or will the 598's be good?

oh boy...what did i do now??? all i did was changed to the 224 clear chip, and the version chip...when i turn the machine on, the 2 greens are lit immediately, but the next yellow is flashing...probabably not a good sign lol

S