where do i plug in this progressive on a s2k

[staz]

im helping a buddy install this meter over the phone but not sure where this meter plugs in?? pic 1 is the meter with 2 plugs..... pic 2 is the netplex board...... does it have to be a specific place where those 2 plugs connect on the netplex board?

[staz]

heres a pic of his board also...... which plugs does he use?

[therockinelvis]

Does the s2000 not need a progressive controller? Looks pretty easy if the s2000 programs it too.

[staz]

I don't think it needs a controller......

[qbert]

Looks like a spectrum progressive.
They are easy, any netplex input plug should work.
Key the machine set it up in progressive as a stand alone.
Check the spectrum board on this site foster has posted excellent set up instructions.

Rich

[cowboygames]

Staz, that ten pin molex should plug in over in the left rear corner of the top box where your audio and other stuff is plugged in

[Foster]

It gets plugged into the power distribution board
the 10 pin  with 5 wires is the netplex connections
the 4 pin with 2 wires is the power.

[staz]

thanks guys i will relay the instructions........ hes just changing kits from non spectrum glass kit to a spectrum glass kit..... i sent him a 45 key chip so he should be good to go.....