Multi Denom with Chami II+ is it possible?

[qbert]

Has anyone been able to get a Chami to work like a spectrum in an S2000? That is can you get multiple values to change with each denomination. say $1000 for $.25, $2000 for $.50 and $4000 for $1.00 etc.

I have set the machine up like the post below from Foster and I am getting the same result all denoms post only to one value set on level 1 and the SA0 value on the Chami.

Thanks
Rich

   

--------------------------------------------------------------------------------

Is multi-denom working but just triggering the cham II+?

To get the Cham II+ to work on multi-denom you have to step through the progressive menus and pick each denom and set it to link level 1 just like you did for a single denom.
The only thing is that the cham II+ will not change base, max, current, or the increment as you do.
This is one advantage to the spectrum II

Example:
Cham II+ set for $1 denom
base amount $2500.00
Max Amount $15000.00
current $3000.00
Increment $0.04 per coin
S2000 set up for denoms of 0.10, 0.25, 0.50, 1.00

you play the machine with it on the dime denom.
the cham II+ is going to still increment at $0.04 and stay between those 2 values no matter how often you change denom

But I suspect if you had a spectrum II and set up each level 1 (each would be enabled as you setup your multi-denom)
You would have base, current, mac and increment for each denom in the machine.
I do not have the multi-denom harnesses to test this easily, will have a EZ-Pay Harness soon that should allow me to add multi-denom to my machine safely

 

[Foster]

The Cam II+ most likely does not support multi denom changes All it gets is a coin/credit bet pulse and can send back the current progressive value.
the bet pulses are sent during the spin or just as the game play ends.

[qbert]

Thanks Foster
I kinds thought that was the answer but you never know with you guys on NLG someone may have figured a work around.

Thanks
Rich