Aristocrat MK6 Excite Poker Machine Problems.

[hqrsyd]

Aristocrat MK6 Excite Poker Machine Problems.

I have a CRT Touch Screen Excite MK6 Machine, I was just adjusting the Focus, I did it about 4 times, Still out of focus, I need a Technicians lead so I can see what I'm doing, Anyone got one or 2 to sell?

The 5th time I put the screen back into the machine, Turned the Machine on and no Screen, Then Error lockup, I have checked everything, Optics, Plugs, Boards, I have even placed the Boards into my Other MK6 Machine, and it does run OK on it. No Errors. Lucky 88.

So there is a Lock up Error and the CRT Screen does not come on at all.

Could I have damaged the Screen or Screen Port?

I don't know what the error lock up is as I can't see the Screen!

Any help and one of those Technicians Screen Cord extension would be appreciated

Thanks         

[SS308]

Put your screen out of your other mk6 into it & see the lock up, I doubt you damaged anything as the molex plug will not allow wires to e crossed/shorted etc.
I have a test lead but no good to you up there, GM Electronics could repair the chassis for you they do all repairs Sydney way.

[hqrsyd]

Thanks for the Reply Find4uto!

My other MK6 is a Slant just tried it no good, My other is to big MK5 19Inch

Not sure what to try now, I'll continue my hunt for a screen extension cord.

Thanks

[Gaming1]

More then likely if touch screen is set then the error is probably touch screen error.if mother board has a VGA socket then try plugging LCD in

[Mazwreck]

Get rid of that well Gardner chassis

by the sounds of it the fly backs stuffed not worth mucking around

I would replace with a LCD better option for that model of machine easy to find now days

[Labrat]

I'm just up the highway a bit and sounds as if your in Sydney.  Defiantly sounds like fly back shot and you can buy them from GM or Game tec. Cost about $24. You can buy a set of leads but pretty expensive unless you using all the time.

[hqrsyd]

All good now, Machines working. It was the screen. A friend had one so I replaced it and works.