Dick Clark's rocking eve vision

[U.S.AutoService]

Putting together a 5 reel vision Dick Clark's Rocking eve vision.

Picking up a part from here and a part from there, putting it in a working vision machine.
 Here is where I am at right now.
I  97 chiped, all went well , then I used a  17 chip (also tried a 31 clear) and can't get past the red screen after ms verify, the cd spins up super fast and then the vision screen reads ....

Error some components are not found

working with software as listed below.        

I did use the CD rom and vision screen/computer that came as a kit. it seems to be working
502 main board
SB000363
SG's are 380's
Version chip vs011gx1
top box has cd player with the Dick Clark cd, original
2 flash cards,
             side slot has ATA10053  , BGM00000 , BGM00125 , DATA
             top slot has what looks like a blank flash card (checked it with my reader/writer)

I played the cd in my computer and it seems to work.


                                              U.S.Auto Service
                                                Dan

[idesign]

Did you try reversing the cards.  Top slot with game card, side slot leave empty.

[U.S.AutoService]

Did you try reversing the cards.  Top slot with game card, side slot leave empty.

Yes, when I reversed the cards it would not boot up the top box at all.  I tried that about 4 diffrent times to confirm it.  It will also not boot if I remove the blank one at all. So it must have something on it , or it needs it for something.  When I put that card in my reader it show nothing on it at all.

Later today going to try a fresh new CD , and then maybe swap the upper vision computer/screen don't have my hopes up, I think both are good already.           

           U.S.Auto Service
                            Dan

[U.S.AutoService]

Top slot with game card, side slot leave empty.

I will double check it this way again, I did a lot of combinations..

Also going to try and update the RFA file 10025 later today.
                        U.S.Auto Service
                              Dan

[cowboygames]

I don't know if a clear chip does anything for the top box CPU. You might try removing the CMOS battery from it for a few seconds and maybe run a cleaning disk through the CD player in case the laser lens is dirty and it's not reading well

[U.S.AutoService]

                              

Well guys, the RFA file 10025 really helped.  I was able to get past the red screen and that error.  I then clear chiped (17) and set all the coin amounts and turned on the printer.  Still working out some bugs, but now I have

PROCOCAL MISMATCH           thought the SG 380's would work  .
going to do some research, it's been a long time since I did anything with my machines.  Now that its somewhat working I might do the chips again and take it slower through the setup steps.

                       U.S.Auto Service
                                Dan

[idesign]

Protocal mismatch usually means your SB chip and BGM files are not matched up as I recall.

[U.S.AutoService]

Protocal mismatch usually means your SB chip and BGM files are not matched up as I recall.

My Stepper Base is Sb000363  

Does that SB chip support my flash card files  ATA10053  , BGM00000 , BGM00125 , DATA ?

anyone have updates ?

                                   U.S.Auto Service
                                         Dan

[idesign]

Upgrade the ATA to ATA10065 if you have it.

From the 380 PSR:

LCD System
Driver The multi slave program is responsible for playing sounds and displaying information such as tilt messages and menu options. The label indicates the factory-installed ATA
SG000380
number and the bonus game modules (BGM). SG000380 requires ATA10065 (or their replacements).

[U.S.AutoService]

Upgrade the ATA to ATA10065 if you have it.

From the 380 PSR:

LCD System
Driver The multi slave program is responsible for playing sounds and displaying information such as tilt messages and menu options. The label indicates the factory-installed ATA
SG000380
number and the bonus game modules (BGM). SG000380 requires ATA10065 (or their replacements).

Upgrade the ATA to ATA10065 if you have it.
From the 380 PSR:

LCD System
Driver The multi slave program is responsible for playing sounds and displaying information such as tilt messages and menu options. The label indicates the factory-installed ATA
SG000380
number and the bonus game modules (BGM). SG000380 requires ATA10065 (or their replacements).

I hope I can steal that file from one of my other vision games.  Will have to go see what I have in the mancave.  Will get back soon...
                    U.S.Auto Service
                          Dan

[U.S.AutoService]

I'm a lot closer than I was this morning, after I upgraded to the ata10065 I now can boot up and get

BONUS GAME NOT SUPPORTED
So I must be doing some good, at least it is booting on its own. My guess is software conflict  
Will try the older cd that I started out with just for kicks
                                  U.S.Auto Service
                                         Dan

UPDATE:  tried the cd , no help .
     Noticed in the config that the bonus game is turned off , and I need a set chip to change it.
3 choices, off , legaency, and atf (not sure , machine is in the basement right now)
should I rechip and change it ?

[U.S.AutoService]

After a good nights sleep, I started from scratch.
1st I again did a ram clear with my 97 ram clear chip.  2 yellow lights and moving on. Made it to the
part where I open the door after the initializing game and the top box screen turns red and now it says

   multi-slave : system error occured !
   Crash Type: misc error
   error initializing BGM game
   GG:0x0021   TT:0x000
   Bonus Game Not Supported

I assume my SB000363 does not support my BGM000125 or vise-versa.   

Anyone reading have a up and running Dick Clark so we can compair notes and files ?   


                              U.S.Auto Service
                                    Dan
                           

[U.S.AutoService]

BUMP

I assume my SB000363 does not support my BGM000125 or vise-versa.   

Anyone reading have a up and running Dick Clark so we can compair notes and files ?   

ANYONE know if the BGM000125 is for Dick Clark ? 

                              U.S.Auto Service
                                    Dan


                           

[U.S.AutoService]

BUMP



                            U.S.Auto Service
                                   Dan

[U.S.AutoService]

Does anyone know if there is another base chip for this game , I have the SB000363 now.

If there is more than one can you please post them here so I might find one from another NLG member

Willing to try anything at this point
     
 many thanks


                                      U.S.Auto Service
                                          Dan

[blueridgeslots]

BUMP

I assume my SB000363 does not support my BGM000125 or vise-versa.   

Anyone reading have a up and running Dick Clark so we can compair notes and files ?   

ANYONE know if the BGM000125 is for Dick Clark ? 

                              U.S.Auto Service
                                    Dan


                           

That BGM is NOT D.C  but the SB is correct, you just need correct Flash Card... $25 exchange

[U.S.AutoService]

That BGM is NOT D.C  but the SB is correct, you just need correct Flash Card... $25 exchange

                       U.S.Auto Service
                          Dan
Thanks so much , you da man

[U.S.AutoService]

Getting so close I can taste it...

 While I was waitting for parts to arrive I changed the top cabinet to the really tall one...
  now with the newer software , and a Clear 97 Chip later , it boots up and the top box LCD says ..



Initializing , please wait................
RFA10025
SIG:..........................................
..............................................
.............................................
DIG:......................................
.............................................
..................................................
BGM00166
SIG:....
DIG:....................................
..............................................
XXXXAT"1Un-expected error

[Neonkiss]

 

[U.S.AutoService]

I am just guessing I have a bad DVD player now, looks like it is requesting a file off drive K:
I don't hear it spinning, but it is a diffrent DVD player, it powers up and ejects the DVD , also it is a diffrent DVD disc too.
tomorrow I will try one of the other dvd players, I now have 3

Anyone agree that drive K: is the dvd player
Crash Type: error

ActorAviPlayer::initialize ()
unable to open K:\cd000006\tv size.avi


              U.S.Auto Service
                   Dan

[U.S.AutoService]

I want to try some new SG chips, anyone have some SG000380's or SG000248's chip sets for sale  ?
I will also try a diffrent board too if I can locate the new sg chips


                       U.S.Auto Service
                           Dan

[cartman765]

Dan, I have sg248s if you want them.

Dale

[U.S.AutoService]

Dan, I have sg248s if you want them.

Dale

I will try anything, sure I will take them.       

will pm you my address, how much ?

              U.S.Auto Service
                     Dan

[JOHN42355]

Dan , I hope this might help you on the Dick Clark New Years Vision Game: On a 45coin 5 Reel it uses SB00363\BGM00166 with CD00006. It Also uses RFA10028
Most of the vision Games use SG000341 + VS011Nx4(single Denom) or SG000380 +VS011NX5 (Multi Denom) and ATA10065,RFA10027 or RFA10028 (Games With Cd's)
Dick Clark Uses RFA10028 and ALL Other vision Games Use RFA10027
This is for NJ Jurs.
                                  I hope this helps You Out.. John

[U.S.AutoService]

Ok, I had to go to the Dr. office a few days ago, my BP was 228 /117 partially because of this Dick Clark

I now have 2 complete sets of glass
4 cd players
3 dick clark cd's  000004 and 000006
2 Stepper base chips sb00363
3 sets of game chips
4 version chips
3 sets of flash cards with diffrent version of files on them BGM00166 included
10 blank flash cards for testing ideas
1 flash drive reader/writer
2 sets of reel strips and 2 complete sets of reels
2 complete working toppers
and no where in this mess do I have a RFA10028 , I do have a RFA10025


Anyone have that file (RFA10028) correction, I must ask for the Original flash card with that file on it and wants to sell it ? I assume it goes on a flash card on the side of the lcd.
 Right now it get to the point where the LCD says

unable to open k:\cd0000006\tvsize.avi (avi something) I know its there

                                        U.S.Auto Service
                                             Dan