Dick Clark's rocking eve vision

[U.S.AutoService]

Well have it up and running today  (11/15/13) it was playing away for 5 minutes and then I got a coin-out jam.  I have to do some reserch now on that , and also I noticed only the max bet key spun the reels, all the other line and credit bet light are out and nothing happens when pushed.  But it was working... turns out I had 2 bad LCD's and 2 wrong cd disc'c and one bad dvd player.... had to steal some parts from a couple other working machines.

Will post more on this later...

                           U.S.Auto Service
                                Dan

[cowboygames]

Sounds like IO card issues now

[cartman765]

  when you get it running again

[U.S.AutoService]

when you get it running again

It's running again, just can't find my camera.  I did a full clear and then found the limit settings and put it to the max, and now no more coin out jamb. Also I took the other 2 DVD players and installed them one at a time and confirmed BOTH are no good. I found that the DVD player from one of my old home computers would work just fine.  I installed the reel strips but found that the baskets are a little bit too big around for the strips to line up correctly. I would say over 3/4 of an inch over all.  I have a diffrent set of reels and strips ready to go but the deck is not the same and they will not work.  I can do some mods and make them work, don't know if it's worth it.
Still have the button issue, tried known good IO cards, did not help.  
 But its been playing great for over 2 hours now.

thank those who have helped out with ideas,  


                                    U.S.Auto Service
                                         Dan

[tollguy316]

Dan ... in regards to the coin -out jam.... Try replacing toe coin optics .... That was the solution for a machine I had.  Bill

[cowboygames]

Have you checked for wire shorts on your buttons? Bad micro switch stuck closed? Or bent pins in the IO card socket?

[U.S.AutoService]

Have you checked for wire shorts on your buttons? Bad micro switch stuck closed? Or bent pins in the IO card socket?

Checked and double checked, but here is something, when I win anything and don't want to wait for the credits to slowly count up I can hit any of the non working line/bet keys and it will add all the credits all at once. So it is taking some kind of signal input from the keys, even though they do do function normally...

        U.S.Auto Service
               Dan

[cowboygames]

You might look at changing the player deck wire harness

[U.S.AutoService]

You might look at changing the player deck wire harness

I switched all io cards and they work in the donor machine. I also check all the buttons and not are stuck.  This was a working machine before I changed the game kit, and I looked at the button harness and it looks on.  I also changed the power supply (the one the main power cord ) and no change.
I think it's something off the wall with the button problem....

                         U.S.Auto Service
                                   Dan