what to use on a squeaky MEI CASH BOX

[staz]

every time i insert a bill or ticket in my mei on my s2k it squeaks......i swapped mei cash boxes and the noise goes away....... so its def the cash box......what can i use on the cash box gears to stop the squeaking......

[CVslots]

Oh good lord....try some silicone lube, vegetable oil, hell, anything slippery you have on hand. Use your imagination!!!!!  

Staz - you kill me!!!  

[qbert]

Does that mean KY will work?

Plastic gears stay away from petroleum based stuff.

[CVslots]

Does that mean KY will work?

Plastic gears stay away from petroleum based stuff.

Like I said...anything on hand....but yeah, no petroleum (that's why I didn't recommend Vaseline). 

 

[staz]

will wd40 work?

[slotsteve]

ear plugs

[cowboygames]

No, wd40 dries out. I use a little 3in1 oil and it's always worked well, but radio shack sells or used to sell a gear lube also.I'd look at the name on the tube, but I'm out of state this week

[staz]

No, wd40 dries out. I use a little 3in1 oil and it's always worked well, but radio shack sells or used to sell a gear lube also.I'd look at the name on the tube, but I'm out of state this week

no hurry let me no when you get back......

[cowboygames]

I'll be back in town on Saturday

[Tech73]

Try some 999 spray

[cowboygames]

Super Lube is the stuff we used in the shop. It's a silicone base lube and worked really well

[staz]

Super Lube is the stuff we used in the shop. It's a silicone base lube and worked really well

is this the stuff? which one?

http://www.super-lube.com/synthetic-aerosol-sprays-ezp-46.html

[Tech73]

Seems to be the same type of spray we use.

http://www.servicesforplastics.com/MoldingAcces/camie/999.htm

[cowboygames]

The one I used was a little grey tube, not a spray, but the spray may work better for your application. I was using on the gears in VCR's and DVD's and whatnot

[staz]

i will get some thanks guys...... also what can i use to clean my wba13 lenses....tickets get rejected and a lot of misreads on tickets? are those jcm cleaning cards any good?

[Yoeddy1]

Cleaning cards...I think those are snake oil.  Calibration card...highly recommended for TITO users.

Jason

[staz]

will a Calibration card make the wba accept tito tickets better?......... can anyone post the directions on how to insert the card and what to change on the wba..... been a while since i callibrated my wba.....thanks

[stayouttadabunker]

Was interesting to me to find out one day that WD-40 meant "Water Displacement"... 
Has nothing really to do with lubrication. 
Sprayed some on my door hinges to get rid of the scary movie sounds...came back later on and still sounded scary! 

[Tech73]

will a Calibration card make the wba accept tito tickets better?......... can anyone post the directions on how to insert the card and what to change on the wba..... been a while since i callibrated my wba.....thanks

To calibrate the transport put the first 4 dip switches down. The BV light should flash when you put it back in the housing. Stick the black part of the paper in and the transport will take over from there. If you wish to test it to see how good it's accepting the bills or tickets then put the first dip switch down and the last four down and put it in the housing. The BV light should stay lit. Now leave the transport in the housing and press the first dip switch back up. This will put it in test mode and you can put anything in it without it accrediting the money. Do this only if you can get the money back out of the BVA box.

To Calibrate  (____^^^^)
To put in test mode (_^^^____) then when in housing (^^^^____)

When the head is very dirty I take a few apart and put them in hot soapy (Dawn dish soap only) water and clean them lightly with a brush. Blow them off with air and let dry. I do this with every part of the head.

[staz]

Tech thanks for the info.........