Welcome, Guest. Please login or register.
November 22, 2024, 07:47:02 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Enhanced board question.		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Enhanced board question.  (Read 3572 times)
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« on: September 30, 2013, 12:08:42 AM »
I have an enhanced board that I am going to use the S2000 enhanced memory board on.
Setting it up looks like it wont be a problem. (Regular 5 reel, 9 line game display Bottom picture)
My question is about the display on the reel glass, do I need to change out the display?
Or will it work correctly with the memory board? (It is for a 20 line game Top picture is what is in the machine)
Also if I change out the reel glass, it would not match the 20 line display....
Thanks everyone!

* display.JPG (244.08 KB, 720x960 - viewed 228 times.)

* Display1.JPG (261.18 KB, 720x960 - viewed 231 times.)
« Last Edit: September 30, 2013, 12:25:18 AM by Jimise » Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #1 on: September 30, 2013, 12:58:59 AM »
I'm completely confused, and I've read your post like 11 times. Sorry, it's been a long week I guess. Are you going to a 9 line game or a 20 line game??? I understand top pic is what's in the machine now, but not sure what you're changing to. If you're going to a 9 line game, the top pic display will not work (as far as I know anyway).
« Last Edit: September 30, 2013, 01:04:14 AM by CVslots » Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« Reply #2 on: September 30, 2013, 01:33:03 AM »
I was afraid of that  Duh!  It looks confusing to me too   Tongue Out 
Ok, I have a TL7s 5 reel 20 line machine with the enhanced board with the "R" board installed.
I want to remove the "R" board and install one of the memory boards / daughter boards that you use the chips and sound simm on.
So I will be going from a 20 line game, to a 9 line game. 
I am wondering if I can just switch out the display from the 20 line one to a 9 line one?
I'm sure someone out there has done this before   yes
Thanks!
 
Quote from: CVslots on September 30, 2013, 12:58:59 AM
I'm completely confused, and I've read your post like 11 times. Sorry, it's been a long week I guess. Are you going to a 9 line game or a 20 line game??? I understand top pic is what's in the machine now, but not sure what you're changing to. If you're going to a 9 line game, the top pic display will not work (as far as I know anyway).
Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #3 on: September 30, 2013, 01:53:05 AM »
Yes you can.  You need to have an 802 board on the door I/O though, the one that faces the hopper, at least that is the case with my setup.  I'm assuming there's a molex connector connected to the current display board that goes to this door I/O card.
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« Reply #4 on: September 30, 2013, 02:05:31 AM »
Great, Thanks for the reply!
Yes There is a connector for the current display (20 line) , and the 9 line display connects as well.
I will check out the I/O card on the door.
Thanks again!

Quote from: rickhunter on September 30, 2013, 01:53:05 AM
Yes you can.  You need to have an 802 board on the door I/O though, the one that faces the hopper, at least that is the case with my setup.  I'm assuming there's a molex connector connected to the current display board that goes to this door I/O card.
Logged
idesign
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 509
Offline Offline

Gender: Male
Posts: 1456


If it aint broke why mess with it?????
« Reply #5 on: September 30, 2013, 10:26:51 AM »
You can leave that display in there if you like.  It will reconfigure itself to 9 lines instead of 20. 
Logged
qbert
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 30
Offline Offline

Gender: Male
Posts: 285
« Reply #6 on: September 30, 2013, 04:57:18 PM »
Your current display will work fine with a 9 line game. I have 9 line games with both types of displays. I do have 802 boards in each one's door I/O board
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« Reply #7 on: October 02, 2013, 01:25:39 AM »
Ok, My game is up and running! I just left the 20 line display in the machine for now.
Thanks everyone for the help!  applause K+
Jim.
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #8 on: October 02, 2013, 02:32:59 AM »
Is the display working fine? Just wondered, from the way you put it, wasn't sure.
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« Reply #9 on: October 02, 2013, 02:53:23 AM »
Hi Roz,
Yes it works just fine. I just wanted to check with the experts here on NLG so I don't  mess anything up (no smoke....)  yes
It was really easy to set up, put in the chips & sound simm, turned on the machine, turn the key, hold down the button, close the door,
up and running. Looks like I need to get a different version chip this is only a single denom, and the scrolling message says insert tokens.
At least it is working........
Thanks everyone!
Jim.

Quote from: CVslots on October 02, 2013, 02:32:59 AM
Is the display working fine? Just wondered, from the way you put it, wasn't sure.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.132 seconds with 19 queries.