CDS Video Poker No Sound

[89chevyman]

Have a video poker machine that has no sound. Game function fine. Tried menu to increase volume & also checked sound test, nothing. The game did have credits on it when resetting volume,  does that matter? If not, any suggestions? Also is the bill validator upgradeable and any info on cleaning them?

[paul]

What happens when you try to set sound and the validator if it is a 12 or 13 it is upgradeable

[89chevyman]

Okay, let me update where I'm at and what I've done. Change all the bulbs on the buttons & tested them in test mode, only one not lighting was the draw button (possibly a bad micro switch) Got the sound to work (Volume was down, DUH ) and changed the WBA-11-SS bill validator chip (WBA-11-SS ID 003 USA V 2.04-15 [7EE4e]) to  an updated ( WBA11 SSID 003 V3.60 NEW 10) chip. Went to start the game, came up with "Call Attendant-Low Battery"? I don't know where to go at this point to get the game up and running, as it was, before I did anything, just didn't have sound & wouldn't take new bills. Also coin comparator does not function-no light, coins go straight through. Not sure if it's enabled or how to check it or enable it? This is a friends machine so I'm very worried about doing too much and causing a major meltdown. Additionally I replaced the top and belly glass tubes and they did not light up when the machine was turned on (haven't changed starters yet this may resolve the problem).  I've been told that these video poker machines do not need birth chips, but if I change the battery, won't this require birth chips and if not how do I internalize the game back into game mode? One more problem, I noticed that someone had removed the bulbs, cut the wire harness and possibly removed the board, for the light above the bill entry bezel. Would this have anything to do with anything? Any and all help would be be appreciated. Oh and available parts, too.  Thanks.

[paul]

First what model is machine 1910 or 1920 ect if you remove battery and install a new battery right away you should be ok       Paul

[89chevyman]

Thanks for the quick reply. Without going over there, I believe its a 1910, as it looks the same as my Wild Deuces game. I replaced the battery as quickly as possible. I will be heading over there to install and report back either a success or a failure. Wish me luck If you reply before I go, is there anything I need to know about the initialization of the game? When I looked at the menu the initialize game was in red and unobtainable as far as a selection in the dropdown menu. Thanks.


Chris

[paul]

you have to have the door open if it is still in red you probley have to rebirth it sometimes at the bottom of screen it will say to use birth chips Let me look on how the 1910 rebirths but if the door is open and initalize is the same color as the rest you can continue with by following instructions when you go into initalize

[89chevyman]

Hey Paul,
  Didn't get over to my friends house as the World Series was on and he's a die hard Red Socks fan, as he IS from Boston Anyway, I have another problem that you might be able to help me with, I hope, I hope. My 1910 won't initialize and shows the following:      Error Code:   89
                                                                 Error Name: EE Schedule Error
                                                                 Error Site:    Power On

                                                                 EEProm  CRC Failure

Soooooooooooooooooo, am I screwed???????? Did not ask for Birth Chips. Did that help any?

[89chevyman]

Well, the Sox won so now I can go over to my friends house & see what's what when I replace the board. Will get back with report. Thanks.

Chris.

[89chevyman]

Well got the machine up and running, no birth chips needed. THANKS PAUL Now to solve the other problems. Its got a "bad" or going bad BV. Makes a racket starting up. Finally got the lights in my machine, as well as my friends, to light up (starters on his, ground wire on mine) Duh.