Welcome, Guest. Please login or register.
September 28, 2024, 02:18:52 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  Hopper shelf wheel size		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: Hopper shelf wheel size  (Read 11901 times)
Magicslots
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 62
Offline Offline

Gender: Male
Posts: 810
« Reply #25 on: April 09, 2009, 04:03:33 PM »
My hopper shelf wheel has has no part number, bur it does have what is left of a stamping "This Side Out" and it measures 5-1/4".
There are no shims under the pinwheel , maybe it needs one.  At hand speed it usually will feed the coins correctly,
when operating in the machine it spits out two or three quaters and then one slips under the knife..
then no more coins and it gets a 3300 error. The new shelf wheel is in the mail and if that doenst fix it, I'll get another pinwheel.
Logged
"Any man who is under 30, and is not a liberal, has no heart; and any man who is over 30, and is not a conservative, has no brains."  (Sir Winston Churchill)
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #26 on: April 09, 2009, 04:16:34 PM »
Seems like that shelf you have is an 1/8" of an inch too small, huh?
That means it was definitely made for some kind of larger token/coin....
Keep us updated when you get the new one!
Logged
Magicslots
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 62
Offline Offline

Gender: Male
Posts: 810
« Reply #27 on: April 17, 2009, 01:19:02 AM »
  Got the new shelf wheel on the hopper and now it works great! yes  The new wheel however has the metal cones on it to stir the coins and the original
agitator wont fit, so I just left it off rather than trim it down.  Bad idea? Good idea?  sometimes it seems that the wheel has gaps in loading when doing payouts.
 The coin count is correct though.

  The coins however were jamming up behind the door and not making it to the tray.  Seems that jerry rigged ticket dispensing hopper mount was too far to the left of the cabinet.
Can you get the original hopper mount rails for these things.  I would like to restore it to as close to factory as I can get it. Anyone got somes spares they would part with?
Logged
"Any man who is under 30, and is not a liberal, has no heart; and any man who is over 30, and is not a conservative, has no brains."  (Sir Winston Churchill)
blueridgeslots
703 730-0821
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1262
Offline Offline

Gender: Male
Posts: 1779


703 730-0821


WWW
« Reply #28 on: April 17, 2009, 02:09:52 AM »
Shelf Wheel with Cones is from a Slant Top with smaller bowl
Logged
Selling Quality Tested and Guaranteed Slot Parts and Machines at Wholesale

http://stores.ebay.com/BLUE-RIDGE-SLOT-SERVICE
Pages: 1 [2] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.089 seconds with 20 queries.