Welcome, Guest. Please login or register.
November 23, 2024, 03:20:50 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Reel Games. (Moderator: a69mopar)
| | |-+  Bally S5500 Error Code 84		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally S5500 Error Code 84  (Read 2621 times)
TehPhreakshow
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 1
« on: October 26, 2013, 10:03:30 PM »
Greetings community.

I have an older (1993 vintage) S5500 machine that has suddenly given me an error that no type of saferam clear will work on.

It is error #84 (followed with 4 flashes of the button lights):   RAM Error Volatile RAM failed to retain information during a self-test.

Battery is checked an good.

Thanks in advance!
Logged
satelliteman
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 29
« Reply #1 on: October 27, 2013, 04:51:30 PM »
I've got the same exact problem on my brother-in-law's machine.  Manual states the 4 "flash rate" is volatile RAM write/read failure (U67 & U68). I'm wondering if I can swap those same-numbered chips from my California Dreamin' machine to verify that the chips in the Black & White  are bad  without ruining my good chips.
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #2 on: October 27, 2013, 06:13:06 PM »
Try removing U67 & U68 and then reinstalling them and see if the reseating resolves the issue.
Logged
satelliteman
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 15
Offline Offline

Gender: Male
Posts: 29
« Reply #3 on: October 27, 2013, 06:58:49 PM »
Tried that previously, including cleaning pins & spraying with cleaner.  No bent pins.
Tried it again, per your suggestion.
Still Get 84 code immediately on power up while holding pseudo coin & test buttons, jw10 in postion for safe ram clear.
 Also tried same procedure using clear chips, same result.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.081 seconds with 20 queries.