Welcome, Guest. Please login or register.
November 24, 2024, 12:20:04 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  IGT Stand alone Progressive Systems.
| | |-+  Mini Photon install		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Mini Photon install  (Read 20784 times)
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« on: April 09, 2009, 02:24:16 PM »
I've an upright cable is connected, set dip switch # 5 to on.
I get into menu # 9 I see 0__0 (_ = space) but no way I can enable the progressive.
Any ideas? I tried jackpot key, test switch to get extra options none work till now!
Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #1 on: April 09, 2009, 02:28:13 PM »
Maybe ... is it mandatory to clear the machine again after I made a dip switch setting change?
Logged
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #2 on: April 09, 2009, 02:30:32 PM »
Hello!

Do you know which SP chip you have installed in the machine?  The newer ones require a SET chip to enable/change the progressive settings.  If you are unsure of your SP number or what a SP is, check out the link below...

http://www.newlifegames.net/spset/SPSS.htm

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #3 on: April 09, 2009, 02:35:56 PM »
6319 and 0731 it is
Logged
brichter
Spaced Alien
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 440
Offline Offline

Gender: Male
Posts: 2374



WWW
« Reply #4 on: April 09, 2009, 02:44:55 PM »
Well, I've NEVER forgotten this myself, but don't forget when you're configuring the progressive, all the parameters you are changing are displayed on the progressive display, not on the winner paid and credits displays.
Logged
Thanks,
Bill
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #5 on: April 09, 2009, 02:48:37 PM »
that's nice to know as well Smiley
but do you think I should reset/clear the machine ?
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #6 on: April 09, 2009, 02:56:11 PM »
Not unless you have the proper SET chip to re-enable the bill acceptor.
Plus you'll have to re-configure the mini photon display again.

I think I would have first reset the machine to zero,
then using the SET chip, re-enable the DBV, and re-configure all your options including the mini photon display.
Then using your SP731 chip, configure everything else the way you want it.
That way, when the photon starts counting - it matches the machines' inner accounting as well.
Logged
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #7 on: April 09, 2009, 03:03:35 PM »
I think you use the reset key to advance the values.....

Any credits on the machine need to be cleared.
Logged
The only way to beat the casino is to own it
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #8 on: April 09, 2009, 05:15:39 PM »
The SP731 does not need a SET chip to set the mini-photon display; it uses the DIP switches on the MPU board. You don't need to clear it, but as Jay said, you do need to make sure that there are no credits on the machine.

A copy of the PSR for SP731 has suddenly appeared in the Submit a New File section. propeller
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #9 on: April 09, 2009, 05:37:22 PM »
Cleared all credits, only got menu 9 with 2 options 1st is 0__0 that i can set to 1__1 but isn't remembered.
other is 00 in the winner paid which I can change no further options. So I guess I've to do a clear
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #10 on: April 09, 2009, 05:46:53 PM »
"menu 9 with 2 options 1st is 0__0 that i can set to 1__1"

This option is for disabling the slot machine, however,  but leaving the lights on.
Slot mechanics use to use that option for in casinos.
You would never use it for home - normally we turn off the machine using the power switch when not using it.


What I think you are doing is missing the 2-0 options entirely
because you're only pushing the test switch to get to the options described above.

Start over, when you get push the test switch, only push it until you get to "2-0".
Then turn the reset key until you get to the "9" for the progressive photon configurations.

I will acquire a copy of the SP731 PSR to double check and get back to you.

Okay disregard above,
I am reading out of the SP731 PSR now...
Check out page 7 on the PSR...
"Progressive #1
Selection<9>"    to get there, just push the test button like Stat said.
Then turn the "reset key" to move the light cursor on the photon display and
use the "Play" button to change the value.
« Last Edit: April 09, 2009, 05:59:37 PM by stayouttadabunker » Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #11 on: April 09, 2009, 05:53:21 PM »
is the 2-0 in the winner paid ? or elsewhere? I only get a 2 in the coins played
Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #12 on: April 09, 2009, 05:55:46 PM »
hehe I thought this would be an easy one for me LOL
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #13 on: April 09, 2009, 06:00:55 PM »
Push the test switch 18 times to get to the photon options!
Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #14 on: April 09, 2009, 06:04:36 PM »
Did that I then see,
winner paid
0  0 al blank credits blink 9 - 0 -9 - 0 etc.
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #15 on: April 09, 2009, 06:05:02 PM »
Dip switch 5 has to on too.
Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #16 on: April 09, 2009, 06:09:52 PM »
I've done that ... I'll check again. Shouldn't be resetted after doing that?
(it was on on on on off off off off)
Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #17 on: April 09, 2009, 06:11:26 PM »
I think ive found the problem get back to you in 10 min.
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #18 on: April 09, 2009, 06:18:00 PM »
Quote from: jstraa on April 09, 2009, 06:09:52 PM
I've done that ... I'll check again. Shouldn't be resetted after doing that?
(it was on on on on off off off off)


No, the DIP switches on an S+ are not used to activate a temporary setup mode like they are in other machines. If the DIP needs to be on to "set" the progressive, then it needs to stay on to use the progressive. (Actually, the them IGT uses in "enable" the progressive.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
dpalmi
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 291
Offline Offline

Gender: Male
Posts: 819



WWW
« Reply #19 on: April 09, 2009, 06:23:28 PM »
Quote from: jstraa on April 09, 2009, 06:09:52 PM
(it was on on on on off off off off)

Dip 5 has to be ON and left ON for the Progressive to work....

Dan #2
Logged
A great man once said, "I was told last time I would get a piece of cake."
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #20 on: April 09, 2009, 06:25:11 PM »
put it down wrong, have that ... you guys are sure that I don't need to clear my machine?
Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #21 on: April 09, 2009, 06:26:07 PM »
Maybe my dip switch is broken? I still do not have the other menu settings. I do get 00000.00 in the progressive display when I enter test mode ...
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #22 on: April 09, 2009, 06:29:11 PM »
Actually, I'm running into the same "9-0" as you with a SP944 chip...
let me change to a SP731 like yours and I'll get back to you.
Meanwhile, read pages 7,8 and 9 in the PSR...we're missing one little stupid step.
You do NOT have to clear your machine....
Logged
jstraa
NLG Member 101 to 500 Post
***

Total Karma Storms: 31
Offline Offline

Gender: Male
Posts: 266


WARNING: CRAZY SLOT PERSON
« Reply #23 on: April 09, 2009, 06:41:15 PM »
Ok thanks for all your help Smiley
Got yahoo messenger?
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #24 on: April 09, 2009, 06:56:26 PM »
OKay,
I got it work on mine....this is what you do.

1). Make sure all the Dips are on except 4 and 8.
2). Turn on the machine, leave the door open.
3). Press the test switch once, turn the reset key until you see a "2" only.
4). Press the reset again, make the 3 digits look like "0-0-1",
5). Press the test switch again, make the digits look like "0-1",press change light button until you hear a ding (This saves it)
6). Press the test switch 10 times until you get to "6"...This is setting for you denomination, press the "Play" button until you get "25".
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.085 seconds with 20 queries.