Welcome, Guest. Please login or register.
November 25, 2024, 04:04:58 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Illuminated Bill Strips (IGRAPHICS)		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Illuminated Bill Strips (IGRAPHICS)  (Read 4462 times)
therockinelvis
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 99
Offline Offline

Posts: 518
« on: November 01, 2013, 11:54:23 PM »
We lost all our info. on these. Someone had posted pictures of how to wire them to the bezel harness if led board was installed and also to denom. light if led also. Pictures were posted of the Jumper inside unit also for making it stay on. If you could help us all out it would be great. Thank-ya-thank-ya-very-much
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« Reply #1 on: November 02, 2013, 01:50:35 AM »
Here is the pic of the wiring

http://newlifegames.net/nlg/index.php?topic=11853.0

* 100_3136a.JPG (97.27 KB, 300x225 - viewed 408 times.)
« Last Edit: November 02, 2013, 02:09:40 AM by Jimise » Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« Reply #2 on: November 02, 2013, 01:57:02 AM »
A couple of links.

http://newlifegames.net/nlg/index.php?topic=12631.0

http://newlifegames.net/nlg/index.php?topic=10142.0
Logged
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #3 on: November 03, 2013, 05:09:54 PM »
Jumper pictures:

http://newlifegames.net/nlg/index.php?topic=3275.msg33257#msg33257
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
therockinelvis
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 99
Offline Offline

Posts: 518
« Reply #4 on: November 03, 2013, 10:21:22 PM »
Thanks to Jimise and Knagle +1 (Karma, or whatever)
Logged
smileman83
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 24
Offline Offline

Posts: 84
« Reply #5 on: November 03, 2013, 11:38:37 PM »
I to lost this thread as I was trying to find out how to add to a game king. I can run the cables and I did splice into the 4 wire harness ( red wire and yellow with black), but power to the unit is potentially an issue. In the bottom left side of the game king ( Iplus) cabinet is a metal box with several plugs present. This is where the wall plug comes out of, so I would assume this is a power distribution panel. There is an open female plug that matches the male plug on the power cord from the power pac for this lighted bill strip, but when plugged in there it doesnt come on with the BV light. Do I need full 120 for the power pac? Can i put a plug end on this or is there another source of 120 V power inside the unit. I thought I would splice in a plug and check to make sure it does work before I diasseble my wire splices and see if these are not correct.

any insight is helpful.

Bruce
Logged
Jimise
Don't pick it up by the candle!
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 75
Offline Offline

Gender: Male
Posts: 752
« Reply #6 on: November 03, 2013, 11:55:15 PM »
It plugs right into that. plug & play....

* power.JPG (302.5 KB, 720x960 - viewed 219 times.)

* power1.JPG (287.26 KB, 720x960 - viewed 272 times.)
« Last Edit: November 04, 2013, 12:00:59 AM by Jimise » Logged
smileman83
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 24
Offline Offline

Posts: 84
« Reply #7 on: November 04, 2013, 12:13:38 PM »
LOL- thats what i was afraid of. I guess my splices into the LED wiring of the BV must not be correct since it didnt fire up when the BV came on. I will disconnect the wires to the BV and move the jumper inside the power box and see if that corrects the issue. I was going to test with a DMM and see if there was current coming from that 3 prong port but if you say thats it, that should be correct.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.104 seconds with 20 queries.