Welcome, Guest. Please login or register.
April 28, 2024, 06:49:10 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Anyone know where/how to get custom wire harness?		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Anyone know where/how to get custom wire harness?  (Read 3303 times)
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« on: November 03, 2013, 10:58:46 PM »
Hey all,

I would like to buy/build a custom wire harness for my machine.

I recently purchased the lighted "this machine Accepts" sticker, I have a Sentry BV bezel that so I don't have the bulb socket to connect to.

I would like to build/buy a Y harness to tap off the 4-pin harness that goes into the BV Bezel.

Foster has done testing that shows pin 1 & pin 4 (Outside 2 pins) will activate the sticker when the BV lights activate.

So I would like to build/buy a Y-Harness to connect to the 4-pin plug/harness from the machine pass threw the 4 wires to the BV Light, and Y off the 2 outside wires that I can connect my lighted sticker to..

Does anyone know where to buy the connector components or any company that builds custom harnesses like this?

I have the resources/knowledge to build the harness myself, I just don't know where to find the 4-pin male/female connectors?

Thanks!

-TheChad

* IMG_1319.JPG (66.81 KB, 653x490 - viewed 170 times.)
« Last Edit: November 04, 2013, 12:21:15 AM by TheChad » Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #1 on: November 03, 2013, 11:39:20 PM »
mouser.com has all the necessary part. This is what you need.

http://www.mouser.com/catalog/catalogusd/646/1680.pdf

You need the "A" part with 4 cicuits and 2 of pins to mate to the ones off the s2000 harness (the J parts).

Connector
http:////www.mouser.com/ProductDetail/Molex/70107-0003/?qs=%2fha2pyFaduhcm9euuby4zZzc24pyfbW20sYNcD95XeMA5ZLdgMGdzA%3d%3d

pins
http://www.mouser.com/ProductDetail/Molex/16-02-0114/?qs=%2fha2pyFaduj8V9nDkfZZhjmOSQi9Dca3%2fcn85xmYQyMkLUCypWCKGg%3d%3d
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #2 on: November 04, 2013, 12:10:02 AM »
Quote from: rickhunter on November 03, 2013, 11:39:20 PM
mouser.com has all the necessary part. This is what you need.

http://www.mouser.com/catalog/catalogusd/646/1680.pdf

You need the "A" part with 4 cicuits and 2 of pins to mate to the ones off the s2000 harness (the J parts).

Connector
http://www.mouser.com/ProductDetail/Molex/70107-0003/?qs=%2fha2pyFaduhcm9euuby4zZzc24pyfbW20sYNcD95XeMA5ZLdgMGdzA%3d%3d

pins
http://www.mouser.com/ProductDetail/Molex/16-02-0114/?qs=%2fha2pyFaduj8V9nDkfZZhjmOSQi9Dca3%2fcn85xmYQyMkLUCypWCKGg%3d%3d



Thanks!

I would need 2 female plugs and 2 male plugs..

I was looking at these:

https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&pa=152734&productId=152734

and

https://www.jameco.com/webapp/wcs/stores/servlet/ProductDisplay?storeId=10001&langId=-1&catalogId=10001&pa=152741&productId=152741

Would those work?

I think they are the same as what you posted?  (I was searching Jameco when I got your reply)

It looks like the plug you posted may be better for what I am doing? (It looks flatter)

Thanks,

-TheChad
Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #3 on: November 04, 2013, 12:20:23 AM »
The second one you posted is a header, it solders into a pcb, you need the connector like the one shown on my post.
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #4 on: November 04, 2013, 12:23:30 AM »
Quote from: rickhunter on November 04, 2013, 12:20:23 AM
The second one you posted is a header, it solders into a pcb, you need the connector like the one shown on my post.

10-4  Do you have a link for the female plug?   I've been looking but it seems there are a bunch that all look the same!

Thanks,

-TheChad
Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #5 on: November 04, 2013, 12:49:27 AM »
http://www.mouser.com/ProductDetail/Molex/70107-0003/?qs=%2fha2pyFaduhcm9euuby4zZzc24pyfbW20sYNcD95XeMA5ZLdgMGdzA%3d%3d

female plug, you will also need the receptor pins

http://www.mouser.com/ProductDetail/Molex/16-02-0102/?qs=%2fha2pyFaduj8V9nDkfZZhgt6h6u660xYiJdzBOrUFULDF9KnPJO9EQ%3d%3d
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
TheChad
NLG Member 101 to 500 Post
***

Total Karma Storms: 5
Offline Offline

Posts: 145
« Reply #6 on: November 04, 2013, 12:54:45 AM »
Quote from: rickhunter on November 04, 2013, 12:49:27 AM
http://www.mouser.com/ProductDetail/Molex/70107-0003/?qs=%2fha2pyFaduhcm9euuby4zZzc24pyfbW20sYNcD95XeMA5ZLdgMGdzA%3d%3d

female plug, you will also need the receptor pins

http://www.mouser.com/ProductDetail/Molex/16-02-0102/?qs=%2fha2pyFaduj8V9nDkfZZhgt6h6u660xYiJdzBOrUFULDF9KnPJO9EQ%3d%3d


That's the same plug as your first post (They call it male (pins)), I need the other end that goes into that plug (They call it female (tubes))..

 I *Think* this is the correct one:  http://www.mouser.com/Search/ProductDetail.aspx?R=50-57-9404virtualkey53810000virtualkey538-50-57-9404

Thanks,

-TheChad 
Logged
rickhunter
SMAA Founder and Chairman
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 226
Offline Offline

Gender: Male
Posts: 1456


I Void Warranties
« Reply #7 on: November 04, 2013, 01:06:18 AM »
Sorry, copy/pasted wrong link.  This is the correct one, which is the same as your link.

http://www.mouser.com/Search/ProductDetail.aspx?R=50-57-9404virtualkey53810000virtualkey538-50-57-9404

The pins are the right ones though.
Logged
A slot collector is like a coin hopper in a machine that never pays out.  they just keep on accumulating assets.
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.09 seconds with 19 queries.