All 3 flourecent not working on a S2000?

[BR549 Auto Sales]

Piecing a machine together from several different parts, harness, etc. Got the machine up and running but I am not getting any power from any of the 3 bulbs, (top, reel and belly) Also this may be on the same issue of the lights, the pull handle will not spin the reels (it does pull all the way down though) nor do I hear the solenoid click when I press the "play 1 credit" button or when the reels stop. Could I be missing a plug connector somewhere not being plugged into the correct spot?

Thanks,

David

[lindam1]

The switch for the handle is so far up under the handle plate you can't even see it. you have to try to feel for it to see if a wire may be broke or have come off. It's a reel pain.

[Jimise]

Yup, I missed that one too when I put one together....

The switch for the handle is so far up under the handle plate you can't even see it. you have to try to feel for it to see if a wire may be broke or have come off. It's a reel pain.

[brianfink]

As far as the lights go, there is a plug usually some where behind the first reel that has two orange colored wires, that powers the bottom two lights. If that isn't it, and your ballasts and bulbs are all good, then I would check your power supply. 

[U.S.AutoService]

I came across this thread looking to fix the same problem, none of the 3 lights worked. Well thanks to brianfink I found the wires and they were not connected.
One was behind the 1 reel and the other was way over to the right side aginst the back of the cabinet...
                    Thanks     

                             U.S.Auto Service
                               Dan

As far as the lights go, there is a plug usually some where behind the first reel that has two orange colored wires, that powers the bottom two lights. If that isn't it, and your ballasts and bulbs are all good, then I would check your power supply.