Welcome, Guest. Please login or register.
April 19, 2024, 07:40:48 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  BALLY Game Maker. (Moderator: tacman)
| | |-+  Where is the Volume Setting/control? - Found		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Where is the Volume Setting/control? - Found  (Read 2245 times)
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« on: December 07, 2013, 05:33:09 PM »
I have a Bally Game Maker, upright, video machine V7200. Just installed a new LCD Screen. The sound is very low...how can I adjust the Sound? Where is the sound volume setting or controls.?? I can go into the Configuration and the sounds all play.. but very low.......

Update...just tried the machine again and now I have NO SOUNDS...Can anyone help?? In short..I went from LOW sound to NO sound....one of the other posts mentioned the 470uF 25 volt capacitor? or any other ideas are appreciated?

I waited a half-hour.....tried again.... and now I get a very low sound again!!!!

Any advice is appreciated.

Thanks
« Last Edit: December 08, 2013, 03:01:24 PM by John0813 » Logged
JMac
Resigned NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 7
Offline Offline

Gender: Male
Posts: 66



WWW
« Reply #1 on: December 08, 2013, 03:26:40 AM »
The volume control is on the MPU board, mounted on the tray just above the monitor....  See attached...

You may or may not have the white plastic shaft on yours, if it is missing, use a small screwdriver...

Warning: Never pull or replace the MPU board/tray with the machine powered on...

* P1000316_Small.jpg (254.84 KB, 1280x960 - viewed 332 times.)
Logged
~- JMac -~
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« Reply #2 on: December 08, 2013, 02:59:32 PM »


Problem Found....Special thanks to JMac, Slick, and Lucky Slots.....I found the volume control and discovered the long plastic screw was stripped and the volume would not adjust. I used a small screwdriver to turn the control and I heard wonderful sounds.....Again thanks to everyone....you are the greatest...
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.072 seconds with 19 queries.