Welcome, Guest. Please login or register.
November 22, 2024, 01:18:33 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  S-2000 502 Board Will Not Accept New Battery ???		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: S-2000 502 Board Will Not Accept New Battery ???  (Read 7906 times)
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« on: December 16, 2013, 11:38:38 PM »
S-2000 machine w/502 board. No green battery. Machine works fine with battery @ 2.80v  Went to change battery to coin battery w/ holder 3.22v and I get no display and red led on mpu blinks. Put old battery back in and machine works fine. Strange, any thoughts on this one.
Logged
Yoeddy1
The OCD kit hoarder
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 233
Offline Offline

Gender: Male
Posts: 3280



WWW
« Reply #1 on: December 16, 2013, 11:45:50 PM »
How about the new battery without the holder? 

Jason
Logged

Yoeddy's IGT Slot Machine Videos
http://www.youtube.com/user/Yoeddy1
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #2 on: December 17, 2013, 12:09:54 AM »
I don't have any new solder in batteries, just coin. I have always replaced the original yellow battery with holder and coin battery and never had any problems. I did try another holder, same problem.
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #3 on: December 17, 2013, 12:12:43 AM »
Double check your polarity
Logged
PLUNGER BOY
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 920


plunger buddies DEAD BOO HOO
« Reply #4 on: December 17, 2013, 12:15:08 AM »
Flip your battery over. P.B.
Logged
SELL me your  TERMINATOR  I GAME TOP GLASS AND BELLY   ( Round Top )
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #5 on: December 17, 2013, 12:26:40 AM »
I do have the + and - correct. I just tried another coin battery that was 2.84 and got the same results. So I do not think it has anything to do with the extra volts. For some reason the board doesn't like the coin battery I guess???   
Logged
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #6 on: December 17, 2013, 12:42:14 AM »
You must have a multimeter, remove the board from the tray and take a reading on the back side of the board. ( I think you will get a better reading on the back side ) And NO the added voltage will not harm anything, I use the old stock of 3.6 V battery's left over from the S+ days.
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #7 on: December 17, 2013, 12:49:28 AM »
I was referring to the battery holder maybe being in backwards
Logged
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #8 on: December 17, 2013, 12:54:51 AM »
I did have a used yellow battery on another board that read 3.20. So I soldered it in and the machine works. I tried 2 different new battery holders and batteries still would not work. These are the same holders and Panasonic batteries  that I always used. The board must not like coin batteries???
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #9 on: December 17, 2013, 01:10:31 AM »
Can't be the battery, it will have to be a polarity issue. Other than how they are attached there is no difference between a clip in and solder in battery. Have you checked your battery holder for a short? Could be bad
Logged
tkrozleski
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 23
Offline Offline

Gender: Male
Posts: 308
« Reply #10 on: December 17, 2013, 01:14:06 AM »
can you post a pic of the non working coin battery and holder mounted on the board?
Logged
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #11 on: December 17, 2013, 01:20:53 AM »
I already have the other yellow battery soldered in. I have replaced many original yellow batteries with the holder and coin battery and this is the 1st time running into this. If I get time in the next day or so I may try to figure this out by putting in a 3rd holder and checking volts on the back of the board as Buss mentioned. Thanks and K+ to all for your input, I will let you know what I find out. Ed
Logged
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #12 on: December 17, 2013, 01:22:28 AM »
By the way had to get cowboy off that triple 6s
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #13 on: December 17, 2013, 01:27:56 AM »
Lol, I'll give ya one back just for taking care of that +1 (Karma, or whatever)
Logged
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #14 on: December 17, 2013, 11:06:33 PM »
Got it working with the coin battery. Apparently the coin battery wasn't making contact. I use a thicker battery br2325 w/ 560ma so I have to bend the + tab to accommodate for the thicker battery and I didn't have it bent enough.  Duh! Duh!   Thanks again for the help.
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #15 on: December 18, 2013, 02:39:16 PM »
the correct battery holder for the type used in the S-2000  can be purchased at Mouser Electronics.

Made by Eagle Plastics:  part # 122-2523-GR    23mm thru hole black holder.     .78 each.


Hope this helps

Jim
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #16 on: December 18, 2013, 05:58:41 PM »
Jim,  Those are the battery holders that I use and purchase from Mouser.
Logged
Jim
MIDWEST SLOTS
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 288
Offline Offline

Gender: Male
Posts: 1172


513-984-2201
« Reply #17 on: December 18, 2013, 06:29:39 PM »
well now you got me scratching my head  Scratch Head

I use a BR2330  COIN cell battery    3volt,  255mah,  23.0 x3.0 mm,   fits that holder like a glove.    yes

you said you use a BR2325   WHICH IS A  3 volt,  165mah,   23.0 x2.5mm  should be loose in that holder     Duh!

a CR2354   IS  a 3 volt,  560mah,   23.0 x 5.4 mm     should have to force it in to that holder.    frying pan



Jim    arrow
Logged
MIDWEST SLOTS   Selling Quality Slot Machines since 1995.  We service and repair all types of slot machines. Mills, Jennings, Bally EM, 1000/2000 series, Proslot, 6000. IGT  M, M+ ,S,  S+, S-2000,  I-Game,  Universal,  Video Poker, Sigma.
erbs
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 66
Offline Offline

Gender: Male
Posts: 195
« Reply #18 on: December 18, 2013, 06:52:08 PM »
To use the CR2354  you need to bend the + tab so that the battery goes in straight and not end up on an angle. I use a small needle nose. I use these because of the higher mah so they last longer. The one in question I hadn't bent the tab enough so it wasn't making contact.


CORRECTION,  A few posts back I posted the size as br should have been cr.
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.122 seconds with 20 queries.