Welcome, Guest. Please login or register.
November 21, 2024, 09:13:04 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  Bally Alpha Reel Games. (Moderator: a69mopar)
| | |-+  Bally S9000 No Sound. Missing parts?		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bally S9000 No Sound. Missing parts?  (Read 5812 times)
Phantsm
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Posts: 38
« on: December 19, 2013, 12:56:54 PM »
I just got my new Alpha and everything works great except the sound. I removed the reels and noticed that some of the plugs are not where they are supposed to be. Something tells me that I'm missing a part, but I could be overlooking something simple. I tried looking at the wiring diagram, but it didn't help much. Please look at the pictures and let me know if I'm missing anything. If someone has a picture of their sound setup it would be helpful so I can plug everything together correctly.

Thanks a bunch!

* 20131218_191711.jpg (743.06 KB, 2048x1152 - viewed 348 times.)

* 20131218_191633.jpg (843.06 KB, 2048x1152 - viewed 373 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #1 on: December 19, 2013, 05:37:49 PM »
Here is a picture showing the location of the sound amplifier, do you have one? plug looks the correct size. If you need one Rudy has them for $29.00

* 1124121229.jpg (671.1 KB, 2048x1536 - viewed 363 times.)

* DSC02061-600x600.jpg (50.75 KB, 600x600 - viewed 355 times.)
Logged
Phantsm
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Posts: 38
« Reply #2 on: December 19, 2013, 06:04:42 PM »
I dont see the amplifier in my slot. Where exactly would it sit?
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #3 on: December 19, 2013, 06:18:42 PM »
above the reels to the right

* 1124121229.jpg (678.58 KB, 2048x1536 - viewed 347 times.)

* 1124121229d.jpg (572.49 KB, 2048x1536 - viewed 383 times.)
« Last Edit: December 19, 2013, 06:40:30 PM by coorslight115 » Logged
Phantsm
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Posts: 38
« Reply #4 on: December 21, 2013, 12:53:30 AM »
I found the amplifier thanks to you picture and noticed a burn mark on the board. Do I need to plug the other two cables in somewhere? I also have a feeling the burn mark is stopping the sound from working. Rudys sells the replacement board for $15 bucks but what about the two cables?

* 20131218_191711.jpg (743.06 KB, 2048x1152 - viewed 348 times.)

* 20131220_125145.jpg (601.87 KB, 1152x2048 - viewed 400 times.)
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #5 on: December 21, 2013, 01:41:31 AM »
Yes that blown capacitor most likely will cause no sound, check for pinched wires to the speakers, belly door is known for harness damage to the sub woofer
Logged
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« Reply #6 on: December 21, 2013, 05:36:10 AM »
Quote from: Phantsm on December 21, 2013, 12:53:30 AM
I found the amplifier thanks to you picture and noticed a burn mark on the board. Do I need to plug the other two cables in somewhere? I also have a feeling the burn mark is stopping the sound from working. Rudys sells the replacement board for $15 bucks but what about the two cables?

Take a look at your Amplifier board.  Do you see any burn marks on that?  The fact you have burn marks and blown components on the back-plane board would indicate that perhaps your amplifier board may be shorted.

I do not have the schematics for the audio amp or the back-plane board, so I am not able to trace anything out for you.
Logged
idylewild1
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 140
Offline Offline

Gender: Male
Posts: 591



WWW
« Reply #7 on: December 21, 2013, 07:39:19 AM »
Have seen this several times. The sound amplifier is usually good. You will need a new RCU backplane board where the burned capacitors are located. This circuit is where they filter the 24V to the sound amp. I thinks this problem is caused by someone plugging in the sound amp in with power applied. I have always replace the RCU board and it has fixed this problem.
Logged
idylewild1

http://samronslots.com/
CommTech
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 251
Offline Offline

Gender: Male
Posts: 503


Joe
« Reply #8 on: December 23, 2013, 02:10:23 AM »
An easy way to check your Audio amp for a short in the power supply circuit ... 

Take an ohm meter and check between pins 4 and 5 of the 5 pin header located along the edge of the PC board not covered by the heat sink.

If those two pins are NOT shorted your good.   yes

If they are shorted, you will damage your new board if you try and use it.    ttth
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.097 seconds with 20 queries.