atari super sprint arcade monitor issues

[clizifer]

i just aquired an atari super sprint upright arcade game. the game itself seems to work fine but the monitor doesnt. i beleive the previous owner had played with the settings and dials on the back of the tube. the picture looks all misaligned and the colors are off. ive uploaded a picture of what it looks like. is there anyway to clean up the image so it is atleast playable?

also im curious how hard it is to do a monitor swap on something like this. the guy i got it from seemed to think he could fit a bigger monitor in it and was going to use an old tv or computer monitor. is this possible to do? i see there is only 2 connectors going to the monitor. the first 2 wire is obviously power and im guessing the other 6 wire connector is the video feed. is this anything like a 15pin monitor connection with seperate power cord??

[slotsteve]

looks  like a old 19in should be a ton of them around  , might just  need a cap kit , don't put too much $$$ those games sell working in arcade auctions for less than 100  mostly under 50

[clizifer]

this is the upright unit with the 3 steering wheels and gas pedals. I believe it is a 19". it says rca on it. where could I get a cap kit for it?

[montech]

Maybe post a picture of the chassis.

 

[slotsteve]

Monitor Rebuild and "Get Well" Kits

www.competitiveproducts.com/list.php?id=219 - Similar to Monitor Rebuild and "Get Well" Kits

50+ items - Monitors: CGA Monitor "Get Well" Capacitor Kits. Each kit ...

01-4198 Nintendo Sanyo monitor $6.25 (Each) $5.45 (L/5)
01-4199 Electrohome G07-CB0/G07-FB0 $7.50 (Each) $6.70 (L/5)
  cap kits are cheap and easy to do  check with competive  most likely you'll have a well, or electrohome  monitor