WTB IGT KEY00002

[4 Deuces]

I posted a WTB for KEY00001 and no one had it.  For the heck of it, I'd like to try KEY00002 and see if that will key Game King 3.x.  Key 17, 22 and 40 don't work on GK 3.x.  I read that it requires Key 1, which no one has, so perhaps Key 2 will do it?

:Dave

[4 Deuces]

I'm "assuming" an RBK00001 (R-Board Key) wouldn't work either.

[fanninislots]

Is your game king on a 3902 board or a 044 board?

Ben

[4 Deuces]

3902 using old GK 3.x software.

[fanninislots]

The Key 22 should do a ram clear. Everything happens on the screen.

Ben

[fanninislots]

how old is the board? If it's the old 3802 you could run into the problem you having.

Ben

[TheAirBalancer]

I have a Game King 3.0 on a 3902 and use a key 17 to make changes without losing the previous settings. My understanding is that a key 22 will clear and key but I haven't used it yet since my machine is fully set up already.

[4 Deuces]

Thanks all.  Here's the scoop ...

It's a 3902 (not 3802) board on a 17" GK upright.

Tried 17, got purple screen, but upon restart, the game is not in KEYCHIP menu.  This works for me on any GK version greater than 4.x.

Tried 22, got to clear RAM, EEPROM and restart, the game cleared, but still not in KEYCHIP menu.  This also works for me on any GK version greater than 4.x.

Without the KEYCHIP menu, I can't change any of the settings including choosing other available games.

So, how does one get into the KEYCHIP menu for Game King 3.x?

 

[TheAirBalancer]

Thanks all.  Here's the scoop ...

It's a 3902 (not 3802) board on a 17" GK upright.

Tried 17, got purple screen, but upon restart, the game is not in KEYCHIP menu.  This works for me on any GK version greater than 4.x.

Tried 22, got to clear RAM, EEPROM and restart, the game cleared, but still not in KEYCHIP menu.  This also works for me on any GK version greater than 4.x.

Without the KEYCHIP menu, I can't change any of the settings including choosing other available games.

So, how does one get into the KEYCHIP menu for Game King 3.x?

 

That's weird on the key 17 because for me I get the purple screen and then when putting the Base chip back in it goes to the key menu right away. I have the 31 games 3.0. I just did it within the last couple of weeks when installing a Bettor TITO.

[bondoexpress]

If you look on ebay  under igt vision jjslots has key 00002

[4 Deuces]

Hmmm ... I'm using ...

Base: M0000129
Game: G0000082
PXL: C0000122
CGF: C0000122

... and it has the following games on it ...

369 Way Keno
Black Rhino
Bonus Poker
Bonus Poker Deluxe
Dbl Dbl Bonus Poker
Deuces Wild
Double Bonus Poker
Double Bonus Reels
Jacks or Better
Nevada Bonus Poker
Red, White & Blue
Spot Keno
Super 7's
Super 8 Line
Triple Diamond
Triple Diamond Keno
Wild Ball Keno


Unfortunately, the slot games are not enabled by default and that's what I'm trying to get to.  I know they're very PE+ish, but I think it's a cool game set (if I can just get it configured).

I know there is a 4.x version with 31 games.  Is it possible yours is a 4.x?  Some popular BASE versions for 4.x with 31 games are:  M0000526, M0000811, and M0000888.  I think any BASE number lower than M0000526 is a 3.x version?

:Dave


P.S. Thanks for the info on Ebay!

:Dave

[TheAirBalancer]

I'm pretty sure (95%?) that I have a 3.0, FYI I'm also pretty noobie and your games appear slightly different than mine. Mostly I'm curious as to your overall experiences and trying to keychip your machine.
Also, all my chips in this machine are "generically" labeled so I don't know the numbers. That said, this is what I have as far as games;

POKER (& one BLACKJACK)
Jacks or Better Poker
Bonus Poker
Bonus Poker Deluxe
Double Bonus Poker
Double Double Bonus Poker
Triple Bonus Poker Plus
Joker Poker
Deuces Wild Poker
Deuces Wild Bonus Poker
Double Deuces Poker
Loose Deuce Poker
Aces Bonus Poker
Shock Wave Poker
Blackjack

SLOT GAMES
Black Rhino
Diamond Mine
Double Bucks
Lion Fish
On the PRowl
Super 8 Line
Super 8 Race
Wild Flower

KENO
Super Keno
Keno
Super Way Keno
4-Card Keno
Caveman Keno
Triple Diamond Keno
Top-Bottom Keno
3-6-9 Way Keno
2-4-6 Way Keno

[4 Deuces]

Yeah, that's a 4.x and IMHO, that's the best version of 4.x to own.  Great variety of slots, keno and poker, plus it includes BJ.  I also like the 59 game version that has more poker than anything else.  The tabular 6.x games are the best of course (again imo), but requires an upgrade from 3902 to either 044 or AVP.  I'm not an expert either, so don't take all this 100%. 

Thanks for your help!  :Dave

[TheAirBalancer]

At first I thought I had a 4.0, but then changed my mind to 3.0   
Whatever I have I agree it is a really great mix.

[lizzo54]

Have you tried a key14? 
I have an older set that has the base chip m0000176 that originally came with a 3802 board I had picked up.  It's been a few years since I ran the set so I don't recall exactly what games but I am almost certain the older ones do not have caveman keno, that I do recall. 

I just pulled the chip tube from the shelf and I had wrote on the tube needs key14.   I should still have it but will ahve to check later on, let me know if your interested in it.

Lenny

[4 Deuces]

pm sent

[knagl]

On my Game King, I have virtually the same software set (although I don't have the On The Prowl slot game, although the sound chips have the sounds for it).  I believe I used a 22 to clear and key it -- I remember it had an on-screen menu.  I do remember that if I selected to keychip it wouldn't do it (the game would just boot normally), but if I did a full clear AND key in the same transaction (ie. on the on-screen menu I had to select everything -- two clears and key, if memory serves), then it worked.  The downside was that I couldn't keychip without clearing, but the upside was that it worked.

[4 Deuces]

Follow-up ... Key 5, 14, 17 and 40 still won't key the machine.  They all affect the EEPROM because after using them, I get the EEPROM error, which requires a turn of the Jackpot Reset key.  So, the keys are trying to do something, but won't key the machine.

So, still trying for Key 2.

:Dave

[Buzz]

Dave When you get the EEPROM error do you go ahead and turn the key ??

[4 Deuces]

Yeah.  I can get it to clear ram too with key 40, just can't get into the key menu.  Upon clear, you do have to turn key for ram clear, press/hold button, then turn the key again for eeprom.  However, when the machine boots up, it comes up with default settings and works out-of-box.  You just can't choose other games without a key.  I even tried holding the white button while booting up for kicks.

Odd game set.  I might try a PE+ clear (SET038 I think) for the heck of it even though the chip is smaller.  I don't know why I'm so set on getting this old game working.  It has Double Diamond slots along with poker, keno and blackjack.

:Dave

[blueridgeslots]

This is the one time that "I always use" and "KeyXX always works for me" WONT HELP YOU

This is the correct Key you need... It is called a Privileged Options Switch and what was used in the early days to get into game options

I have posted this info more than once but it is probably buried deep under the piles of KeyXX will work threads

This switch was on the 380x boards in the early days (like 1997) they were in J-3 I think on the 3800 series boards and I don't have one in front of me but U-9 in the 3900 I believe, plugs right in, now I would venture to say you could hook 2 wires up to the plug on the board and run out the lock hole and touch them together but I don't recommend half assed repairs so I will say here is the correct one below

Anybody need proof this is correct Key please put up as much money as you want to loose and call bet


Here is detailed instructions off a PSR that used a Privileged Options Switch


OPERATOR-SELECTABLE OPTIONS
To access the Attendant Menu, turn the reset key.  To access the Operator Menu, open the door and press the test switch.
Some options in the Operator Menu are unavailable while a game is in progress, while credits are accumulated, or while the machine is in a hand-pay lockup condition.  Some options can only be accessed from the Privileged Options Menu, which requires the security (privilege) key.  To display the Privileged Options Menu, perform the following steps:  Open the machine door.  Make sure the security key switch located on the front of the processor tray is in the off (vertical) position.  Press the test switch.  Insert the security key into the key switch and turn it clockwise 1/4 turn.  Touch the Setup icon, then the Privileged Options icon.  The security key must be left in the on position while accessing the Privileged Options Menu; the game will exit the menu if the key is turned to the off position.

[4 Deuces]

HAIL TO JIM!

 

HE IS RIGHT!

 

Not being afraid to fry a machine, I went ahead and did the wire trick, followed the instructions in the PSR, and I got access to the Privileged Options.

What's funny is ... I still can't choose which games to appear.

My options don't include that.  Only includes things like denom, tournament, and some others that surprised me were considered "privileged".  Anyway, will keep trying!

THANK YOU JIM!

[blueridgeslots]

Make sure No Credits on game, push test button on cpu... then connect wires, set up then privileged options icon, then make sure you disable a game before trying to enable another

[4 Deuces]

I think I figured it out.  The "Triple Double Diamond" slot game is only available for tournament game.  When I choose to setup tournament (via the privilege menu), my choices include the other games that aren't part of regular play.  So, it must be the game set, Base or something, that doesn't allow that particular slot to be played as part of the regular slot, only tournament.