WTB , S2000 Vision 5 reel shelf . non back lit reels FOUND, and thanks all

[U.S.AutoService]

Still looking for a 5 reel shelf for my Dick Clark Vision machine


                     U.S.Auto Service
                      Dan

[CVslots]

Dan, we have a 5 reel vision that will be parted out shortly. I'm assuming the reel shelf is unique to Visions and not the standard 5 reel machines? Never looked, to be honest. 

Any idea of a part number?

[U.S.AutoService]

No part number, I converted from a Back-lit kit to this Dick Clark and the reels are non-lit.  I can only guess what it looks like, but the picture below is what I think it would look like (note the mounting slot in the front.) The picture is of a 3 reel shelf, I need a 5 reel shelf..

                 U.S.Auto Service
                      Dan

Dan, we have a 5 reel vision that will be parted out shortly. I'm assuming the reel shelf is unique to Visions and not the standard 5 reel machines? Never looked, to be honest.  

Any idea of a part number?

[CVslots]

Ok, let me get you some pics then. No since shipping this thing across country and back again if its not what you need.

[cowboygames]

There's only two types of shelves for 5 reel slots, wide and narrow reels. Backlit or non-backlit doesn't matter. If you don't use a back light controller then you just converted to non-backlit.

[CVslots]

While i thought (well, hoped) that that was the case. We just checked some games and came up with 3 different part numbers, 1 for wide (2.25"), 1 for narrow (2"), and one for the Vision. I'll have to do some more digging to see what the diff is.

[U.S.AutoService]

See I used my original back lit reels with the Dick Clark Strips and when installed they are about 3/4 of an inch too long.

I happened to find a complete set of strips on reels and they fit the strips perfectly, just now those reels will not fit the shelf.

They are 2" reels, I wish I had my camera here I would take a picture of the bottom of the reel, will get that done tomorrow.

I think I have a user here who has the shelf in question , I will ask him for a picture of the shelf.


                             U.S.Auto Service
\                                 Dan

[CVslots]

Interesting. Never changed from Vision to "non-Vision" or vice versa, so would never have thought they were different lengths (or different reels, however you want to look at it).

[U.S.AutoService]

Still looking , recieved one today and its like the one I already have.  Look closley at the front of

the shelf.   I will get a picture and some numbers off the reels tonight to see if that helps..


                                         U.S.Auto Service
                                              Dan

the reels have a part number
66003200 rev:A1 , march 27, 2002

[U.S.AutoService]

I took a picture of the 2" reels I have.  I know there is a correct shelf someplace out there.
I have 5 matching reels with the correct reel strips. 
I forgot who sent me the reels, it was over a year ago, but it was a user here from NLG. 

                                    U.S.Auto Service
                                         Dan

[CVslots]

Ok Dan, I will look today for you and see what we can find. I will check reel numbers against your and go from there.

[Forrhouse]

66003200 REEL, ASSEMBLY S-SLOT 3.312W, NO BACKLIT S2K


Hope this helps.

[U.S.AutoService]

OK, this really helps, seems like I have the only s2000 that has a vision screen and does not have back lit strips.

<a href="http://www.youtube.com/v/iE8CJwXSPRs&rel=0" target="_blank">http://www.youtube.com/v/iE8CJwXSPRs&rel=0</a>

66003200 REEL, ASSEMBLY S-SLOT 3.312W, NO BACKLIT S2K


Hope this helps.

[CVslots]

I don't think our Ms. Little Green Men has backlit reels. Which leaves you in luck possibly, as that is the machine I'm hoping to get your parts out/off of. That machine has been jinxed since the day we got it...it's just goofy and certain things are just okie-rigged. It's finding a nice home on the scrap trailer just as soon as its parted.

[lindam1]

Dan,

Here's what I got. PT # 67015302, 12/02.. 19 1/2 X 8 3/4 See pic's
Came out of a vision, before  I made it back lit.

[lindam1]

The reel plug

[U.S.AutoService]

        Looks like a WINNER to me.    

My next question is , Is it for sale ?

If so  how much ?

Then somewhere I need to say , Yes , there are at least 3 diffrent shelves for a 5 reel s2000

                         U.S.Auto Service
                                Dan

and      to you !

[lindam1]

Dan,

With or without reels. The reels are 2 inch

[U.S.AutoService]

I have the reels and strips.. just need the shelf...

                        U.S.Auto Service
                          Dan

Dan,

With or without reels. The reels are 2 inch

[lindam1]

$15.00 Plus shipping. I'll figure the shipping and let you know in a bit.

[lindam1]

Nothing worse than a POed customer. Do you have the right reel harness for NON back lit?  It needs to be 607-536-020A.

[U.S.AutoService]

    The shelf came today, all is good.
Thanks so much lindam1 , 


                                         U.S.Auto Service
                                                  Dan

$15.00 Plus shipping. I'll figure the shipping and let you know in a bit.

[lindam1]

It arrived..........but is it the right one for your machine?

[U.S.AutoService]

It arrived..........but is it the right one for your machine?

Yes ..... correct one....



                                U.S.Auto Service
                                Dan