Change button flashing on and off

[rbarton]

I had a low battery which I changed out.  I installed the P10 clear clip, move dip switch 7 & 8 and cleared memory.  Moved dip switches back and installed game chip and reset game. Everything works fine except the change button flashes on and off.  Any suggestions on how to turn off the change light.  Thanks

[JMac]

 While I have not heard of this happening before, I suspect that a setting is incorrect.

What I would do is redo the clear and setup and take care in the selections and see what happens...


If your machine is a HUO, let me ask you this, are you tired of stuffing money in it to play it??  If not, continue on, if so,  just put it in demo mode (Free play) and never put money in it again; when doing the setup, just tell it no coin acceptor, no bill acceptor and no hopper, finish setup as normal and when done you will be able to play it with no money.  Now I do not know if this is mains dependant, but I do know that with -24 mains and -12 graphics chips, it works like a charm.

More info is on my web site here; http://tinyurl.com/lepp7w8

Good Luck!

[rbarton]

Thanks for the help

[JMac]

While I have not heard of this happening before, I suspect that a setting is incorrect.

What I would do is redo the clear and setup and take care in the selections and see what happens...

Whatever it takes to cure this, please post the answer!


If your machine is a HUO, let me ask you this, are you tired of stuffing money in it to play it??  If not, continue on, if so,  just put it in demo mode (Free play) and never put money in it again; when doing the setup, just tell it no coin acceptor, no bill acceptor and no hopper, finish setup as normal and when done you will be able to play it with no money.  Now I do not know if this is mains dependant, but I do know that with -24 mains and -12 graphics chips, it works like a charm.

More info is on my web site here; http://tinyurl.com/lepp7w8

I am assuming that you have checked the wiring and made sure that button is not stuck??  Again, in a HUO situation if all else fails disconnect the power to that one button!

Good Luck

[rbarton]

Yes, I thought of disconnecting, but I would do it as last option.  The button is not stuck.