Welcome, Guest. Please login or register.
November 21, 2024, 07:29:49 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S2000 and Vision Games.
| | |-+  Back lit reels.		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] 2 Go Down Print
Author Topic: Back lit reels.  (Read 14558 times)
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« on: January 26, 2014, 03:14:31 AM »
Hello been awhile since I have posted in there.. Well I finally decided to upgrade my S2000 IGT to backlit reels.. Can someone direct me to a post that show's step by step how to install the power supply ect.. Or if this isn't one give me directions / pictures on how to do it.. I would really appreciate the help. Thank you!  I still have another week before I get them so it's no hurry.  Odie
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #1 on: January 26, 2014, 03:32:19 AM »
Quote from: mowtisss on January 26, 2014, 03:14:31 AM
Hello been awhile since I have posted in there.. Well I finally decided to upgrade my S2000 IGT to backlit reels.. Can someone direct me to a post that show's step by step how to install the power supply ect.. Or if this isn't one give me directions / pictures on how to do it.. I would really appreciate the help. Thank you!  I still have another week before I get them so it's no hurry.  Odie
Did you just buy the reels? Or a complete set of the parts needed to change them? You will need more then just the reels...

Backlit reels
Backlit I/O harness
Backlit reel harness
Backlit control board

It's pretty simple, you'll be up and running in no time.

Harvs
Logged
dcpyatt
Contributing NLG Member
New NLG Member 1 to 100 Post
*

Total Karma Storms: 6
Offline Offline

Gender: Male
Posts: 43
« Reply #2 on: January 26, 2014, 12:29:48 PM »
While we are on the subject -

I have several bulbs out on my backlit reels.  What are the preferred bulbs/LED equivalents for maximum effect?

Any suggested suppliers for bulbs?

I have a local pinball show coming up at the end of February, but may want to do something prior to that.

Thanks!
DaveP in Ohio
Logged
cowboygames
Abbys Dad
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 680
Offline Offline

Gender: Male
Posts: 3916


Happiness in life is a great dog
« Reply #3 on: January 26, 2014, 01:09:10 PM »
The only thing that works right in those is the original XE359 bulbs. Anything else is too bright, too dim or could damage you back light controller
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #4 on: January 26, 2014, 06:18:10 PM »
I will be getting the all the parts.. To hook it up.
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #5 on: January 26, 2014, 07:01:56 PM »
Quote from: mowtisss on January 26, 2014, 06:18:10 PM
I will be getting the all the parts.. To hook it up.
Cool. It'll be a simple process then..

Did you get a kit or purchase 'Backlit' strips for your game?
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #6 on: January 27, 2014, 01:23:35 AM »
I have a few backlit game kit's which will be nice.  I do need to find some triple double wild cherry backlit reels tho. 
« Last Edit: January 27, 2014, 03:16:24 PM by mowtisss » Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #7 on: January 27, 2014, 01:42:42 AM »
Quote from: mowtisss on January 27, 2014, 01:23:35 AM
I have a few backlit game kit's which will be nice.  I do need to find some triple double wild cherry backlit reels tho.  The pair I have I had to have made.. =(
Ok. Once you get your parts let us know. - You'll be spinnin them backlit's in no time.

Harvs
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #8 on: February 06, 2014, 11:23:26 PM »
I have recieved my backlit reel's and parts.. Now I need some help please =)  Is there anyone that has pictures of where to hook stuff up and such..  I would really appreciate the help.  I am having problems finding any post's on the subject on here..
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #9 on: February 06, 2014, 11:35:15 PM »
Quote from: mowtisss on February 06, 2014, 11:23:26 PM
I have recieved my backlit reel's and parts.. Now I need some help please =)  Is there anyone that has pictures of where to hook stuff up and such..  I would really appreciate the help.  I am having problems finding any post's on the subject on here..
I'll snap a few pics for ya.. Give me a sec.

Harvs
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #10 on: February 06, 2014, 11:40:11 PM »
awesome!!! Thank you so much applause applause applause applause applause applause applause applause
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #11 on: February 06, 2014, 11:54:01 PM »
Ok.. 1st pic - You put your backlight controller board here.. (With or without the metal cover.. There is also a longer bolt-on cover that will require you to remove a few bolts, then attach.. Not sure what you have..) There is a white molex connector that will be in that area, connect it.

2nd pic - Connect the I/O harness to the I/O and the controller board.

All while the machine is OFF obviously.. More pics, one sec..

* photo (2).JPG (456.51 KB, 1296x968 - viewed 534 times.)

* photo (4).JPG (433.51 KB, 1296x968 - viewed 538 times.)
« Last Edit: February 07, 2014, 01:35:48 AM by Harvs » Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #12 on: February 07, 2014, 12:00:19 AM »
Now remove your reel harness from the back of the reel tray and the mother board.., Connect the back-light harness in it's spot and connect the far end to the controller board, upper right. -Replace reels with the backlit ones. Fire that badboy up..

(And yes, I have 3 arms as seen in the last pic.. I happen to wear my watch on my small other left wrist.)

Harvs

* photo (5).JPG (492.75 KB, 1296x968 - viewed 531 times.)

* photo (6).JPG (148.23 KB, 640x480 - viewed 454 times.)
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #13 on: February 07, 2014, 12:01:55 AM »
Thanks for the help!! Going to go try this now. I hope all goes well....  applause applause applause applause applause
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #14 on: February 07, 2014, 12:06:35 AM »
Quote from: mowtisss on February 07, 2014, 12:01:55 AM
Thanks for the help!! Going to go try this now. I hope all goes well....  applause applause applause applause applause
Post back... Shouldn't take you that long. - Make sure all connections are snug..
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #15 on: February 07, 2014, 12:23:26 AM »
I am having a  heck of a time getting the reel strips on!  Is there a trick.. Also i can feel the notches.. But they don't catch on the inside..
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #16 on: February 07, 2014, 12:27:10 AM »
Quote from: mowtisss on February 07, 2014, 12:23:26 AM
I am having a  heck of a time getting the reel strips on!  Is there a trick.. Also i can feel the notches.. But they don't catch on the inside..
There is a marker on the outside of the reel basket to show where the notch goes on the strip. It's the largest bump/marker on the outside of the reel basket..

I kinda round the strips when installing, not fold or over bend them, but make an arch and spin the reel around letting the strip fit into the groove.. Then pull kinda tight on the strip, especially on the 'open' side of the strip/basket and adhere..
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #17 on: February 07, 2014, 12:58:18 AM »
Did everything right and there not working  Scratch Head
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #18 on: February 07, 2014, 01:03:19 AM »
Quote from: mowtisss on February 07, 2014, 12:58:18 AM
Did everything right and there not working  Scratch Head
Not working as in lighting up? Or not spinning?
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #19 on: February 07, 2014, 01:08:07 AM »
There spinning just not lighting up..
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #20 on: February 07, 2014, 01:10:26 AM »
Quote from: mowtisss on February 07, 2014, 01:08:07 AM
There spinning just not lighting up..
Ok.. What game are you running? SB#? What

I'll just PM ya..

Harvs
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #21 on: February 07, 2014, 01:32:51 AM »
Here is the board looks different then the one in your pictures.. I took the metal casing off

* 1391743895367.jpg (859.54 KB, 2560x1920 - viewed 444 times.)
Logged
Harvs
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 218
Offline Offline

Gender: Male
Posts: 604
« Reply #22 on: February 07, 2014, 01:40:43 AM »
Quote from: mowtisss on February 07, 2014, 01:32:51 AM
Here is the board looks different then the one in your pictures.. I took the metal casing off
My board will also run LED, the one you have is fine, just has different connector placement. The I/O, reel harness, and connector from the machine will fit into each.
Logged
mowtisss
New NLG Member 1 to 100 Post
**

Total Karma Storms: 1
Offline Offline

Gender: Male
Posts: 15
« Reply #23 on: February 07, 2014, 01:44:41 AM »
All hooked up right.. Don't know what It could be...  frying pan
Logged
777sizzler
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 129
« Reply #24 on: February 07, 2014, 02:18:13 AM »
If you have a reg. s-2000 and not a vision the pwr. molex connector is wire tied/secured near the pwr. supply.  Needed to pwr the board.  Reels will still spin etc.-no pwr-no work.  Check it out. 
Logged
Pages: [1] 2 Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.116 seconds with 20 queries.