Need help with an S2000 Triple Stars Multi-Denom touch panel setup Please :)

[CRez]

Hey Everyone!

This is my first post on here and I’m a first time slot owner 

So I purchased an S2000 Triple Stars Multi-Denom ($1/$2/$5/$10). Machine has a working bill reader and printer.

Recently I encountered an issue to which I was advised to clear it (SAS Down message).

I successfully cleared the machine on the first time (yay!) Thanks to the help of reading these forums.

I do have the appropriate clear chip and (I think the correct) Key Chip (its labeled Key for S2000).

After Clearing the machine, I proceeded to use the Key Chip to set it back up.

Everything works… EXCEPT… I can not get the Multi-Denomination Touch Panel to setup.

So heres my main problem…

Using the Key Chip to pull up the settings:
 - I found the Settings under the Key Chip Config (7.1.1.4 - Touch Panel) HOWEVER… It will not allow me to change anything
 - It does however allow me to change the player denom (7.1.1.3)

Everything else works, Prints fine, currently playing on $5 denomination.

If anyone could please help me to figure out why its not allowing me to change this setting even WITH the clear chip

I am still new to all this so maybe I’m missing a step or not doing something right. 

Thank You Everyone   

[qbert]

 
You did well so far by just reading the forum good job.

After you key the game go to 'game selection' 7.1.2 and select the percentages for each of the 4 games. you can have each denomination play a differant payback % or you can set them all the same. Once you set the four games in 7.1.2 you should be able to go back to 7.1.1.3 then 7.1.1.4. to set up the key pad.
Let me know if this helps.


Rich

[CRez]

Thank you so much Rich!

Ill give it a shot You guys are awesome!

[CRez]

IT WORKED

Thank You so much Rich! Great Advice!

[qbert]

Nice job glad you got it working.

 



Rich