Welcome, Guest. Please login or register.
November 23, 2024, 12:21:02 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  Having trouble with Bill validators working in williams 550s		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Having trouble with Bill validators working in williams 550s  (Read 12220 times)
rob20_760
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 18
« on: May 13, 2009, 04:25:14 AM »
i have 6 williams 550 machines.  The bill acceptors will not take anything.  Now after trying several different wba bill acceptors with no success.  I finally went to the revision section on all of them and I noticed that all of the working ones say jcm wba and all of the non working ones say jcm 145/146. Is this my problem and can I fix this with a RAM CLEAR.

* jcm.JPG (524.05 KB, 1600x1200 - viewed 510 times.)

* wba.JPG (503.67 KB, 1600x1200 - viewed 508 times.)
Logged
"There is no hunting like the hunting of man, and those who have hunted armed men long enough and like it, never care for anything else thereafter." - Ernest Hemingway
tacman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #1 on: May 13, 2009, 10:04:42 AM »
Rob, if all the bill validators are JCM WBA units and the ones marked WBA in the revision are working then yes, a clear and choosing of JCM WBA in the bill validator setup should fix the problem. The 145/146 is a different type of JCM validator, they are DBV units. Hope this takes care of your problem.

 Dan (tacman)
Logged
tacman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #2 on: May 15, 2009, 10:26:41 PM »
rob20_760, did you ever get this issue resolved?

 Dan (tacman)
Logged
rob20_760
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 18
« Reply #3 on: May 16, 2009, 06:26:36 AM »
not yet.  I left my clear chips in my fathers jeep and he moved them so I'm still trying to find them so I can check it out.
Logged
"There is no hunting like the hunting of man, and those who have hunted armed men long enough and like it, never care for anything else thereafter." - Ernest Hemingway
rob20_760
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 18
« Reply #4 on: May 16, 2009, 03:26:09 PM »
well I did the ram clear and I don't see an option for choosing a bill validator. Is there a different type of clear chip.
Logged
"There is no hunting like the hunting of man, and those who have hunted armed men long enough and like it, never care for anything else thereafter." - Ernest Hemingway
rob20_760
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 18
« Reply #5 on: May 16, 2009, 05:45:44 PM »
These are the only menus that come up when i do a ram clear.

* IMG_0244.JPG (426.27 KB, 1600x1200 - viewed 442 times.)

* IMG_0242.JPG (412.26 KB, 1600x1200 - viewed 467 times.)
Logged
"There is no hunting like the hunting of man, and those who have hunted armed men long enough and like it, never care for anything else thereafter." - Ernest Hemingway
sintaxerror
Guest
« Reply #6 on: May 19, 2009, 03:44:58 AM »
I know there is a percentage set chip. It's possible the BV options can be set in there. I think it's possible that those options are in the main setup menu.
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #7 on: May 19, 2009, 12:35:57 PM »
There are no BV settings period.

The % chip is just that and nothing more.

If the BV does not work its either the BV, the cable or the I/O board.
Logged
tacman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #8 on: May 19, 2009, 08:04:47 PM »
Dave, isn't there a BV setup along with the coin mech and game setups. I thought the choices were JCM WBA, JCM DBV and MEI Mars. Now that I have that other board in mine, its hard to remember the regular 550 setup. Or maybe that setup option isn't available because the machine doesn't think there is any BV due to a problem or not being connected properly?

 Dan (tacman)
Logged
Slotmaster
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 172
Offline Offline

Gender: Male
Posts: 532
« Reply #9 on: May 19, 2009, 10:12:38 PM »
NXT yes, 1.5+ no

Looking at the first post the question was on the 1.5+

There is nothing to setup on the 1.5+ that I know of and even if the BV was removed during the clear it will still work.
Logged
tacman
Topic Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 446
Offline Offline

Gender: Male
Posts: 1537


Genius in training.
« Reply #10 on: May 19, 2009, 10:47:52 PM »
Thanks for clarifying. CRS seems to occur more often these days.

 Dan (tacman)
Logged
Billythekid
NLG Member 101 to 500 Post
***

Total Karma Storms: 19
Offline Offline

Gender: Male
Posts: 103


Oct 2011
« Reply #11 on: July 27, 2009, 08:47:18 PM »
I had an issue with the 550 and BV. The problem was that the 550 requires a serial RS-232 board to piggy back on the side of the BV. Only one of my BV's had that board so it worked in both of my machines but the other BV's whether WBA or DBV did not until I got a comm board from Blueridge.  There are two locations for the comm board, either attached to the side of the BV or right behind the BV cage.

I don't know if this is your problem but if you have a BV that works no matter what machine you put it in then obviously the problem is with the other BVs not the 550s. Look for the pigtgy back board on the working BV then see if the other BVs have it or not. Also, your BVs not working may not have the WMS firmware loaded. If they are the type with the removable Eprom move the eprom from working to non working and see if a non working works with the firmware from the current working BV.

Good Luck.
Logged
bobahahn
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Posts: 1
« Reply #12 on: November 15, 2013, 02:23:06 AM »
I changed out a JCM UBA for an MEI cash flow and now I'm getting a stacker missing error
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.107 seconds with 21 queries.