Welcome, Guest. Please login or register.
November 24, 2024, 07:29:15 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  Bill Validators going offline intermittently on different machines		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Bill Validators going offline intermittently on different machines  (Read 3798 times)
Abe Frohman
I fix slightly more stuff than I break
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 67
« on: June 04, 2009, 12:27:09 PM »
I seem to routinely knock my bill feeders offline by just generally goofing with the system on both Bally and IGT machines.  What am I doing wrong?  I'm not knocking the cables out, but I might be goofing with the reset button or sliding the MPU tray out/in, etc...  Is there a software option that I'm tripping or something?  They come back online after I futz with it long enough, but it's not like I'm putting the SET/CLEARs in or anything.  I never know why they quit recognizing, and I never know what I did to fix them either.

I'm more venting than looking for an answer, I realize how vague this problem/statement is.  Maybe I've just got crappy old BV's with attitude problems.  Hmm.
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #1 on: June 04, 2009, 12:55:12 PM »
I always let the bv complete initializing before closing the door
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #2 on: June 05, 2009, 01:32:00 AM »
Thanks Mopar,
I have the same DBV200SH problems on a SG150B Plus as well...
I'll try your suggestion next time...
Logged
Abe Frohman
I fix slightly more stuff than I break
New NLG Member 1 to 100 Post
**

Total Karma Storms: 3
Offline Offline

Gender: Male
Posts: 67
« Reply #3 on: June 05, 2009, 01:58:45 PM »
I don't know exactly how, but apparently I zapped something on the MPU...  I guess...  When I first noticed the intermittent problem it was workling "less and less" and I could swear pushing on the top of the BV assembly helped, but then it went 100% dead.  I switched Bally 5500 MPU's, and the "good" board works just fine with both bill assemblies and in either machine.  Putting the "bad" board in either machine - no BV.  I've reset the RAM and DIP swicthes 100 times, I guess I just nuked something on the first board such that it no longer likes BV's, strange.

This is the machine where I fritzed a power supply by slamming the MPU into the backplane.  Guess I have to try new ROMs or a board or something...
Logged
a69mopar
647-402-1977
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 600
Offline Offline

Gender: Male
Posts: 3508



WWW
« Reply #4 on: June 08, 2009, 12:20:56 AM »
Glad to hear you got it going,

Make sure you have the power switched off prior to removing or reinserting the main board.

Thanks,
Wayne
Logged
         www.GTASLOTS.com      647-402-1977              BALLY S6000 GALLERY
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.097 seconds with 19 queries.