Welcome, Guest. Please login or register.
October 07, 2024, 02:25:51 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  What would you use to cover the keyholes in slot doors?		 0 Members and 10 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: What would you use to cover the keyholes in slot doors?  (Read 8005 times)
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« on: August 06, 2009, 06:14:13 PM »
I am looking for a few of these little things.  These two came in when I ordered a set of buttons so I assume that's what they are for.  Does anyone have an excess of them?  Are they expensive?




MODERATOR: Changed subject and moved from classified section after the ad expired. SF garfield

* DSCN2167.jpg (117.89 KB, 1024x683 - viewed 364 times.)

* DSCN2166.jpg (109.14 KB, 1024x683 - viewed 356 times.)
« Last Edit: September 29, 2009, 07:47:10 AM by StatFreak » Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
rocky mountain slots
Rocky Mountain Slots
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 280
Offline Offline

Gender: Male
Posts: 235



WWW
« Reply #1 on: August 06, 2009, 11:04:33 PM »
are they for igt poker buttom plugs or for s2000 buttons
Logged

http://www.rockymountainslots.com/
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #2 on: August 07, 2009, 01:23:53 AM »
Quote from: rocky mountain slots on August 06, 2009, 11:04:33 PM
are they for igt poker buttom plugs or for s2000 buttons

I believe they are for IGT to cover the button holes that aren't used but I want them for the keyholes in the doors.  They don't even have to have the nuts and bolts attached, cause I can use double stick tape but I just want something to cover the keyholes.

Thanks
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
knagl
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 642
Offline Offline

Gender: Male
Posts: 5489


Kevin
« Reply #3 on: August 07, 2009, 06:10:57 AM »
Quote from: ashyron on August 07, 2009, 01:23:53 AM
I just want something to cover the keyholes.


Ron-

A friend of mine came across some plastic plugs at a local surplus store.  They look like the type of plugs that would go into an office chair or a cheap desk to cover the screws.  They're perfect for the keyholes, though.  Here are a couple of pictures of the things, plus a visual of one of them installed in one of my machines:
Logged
If you find this site helpful, please consider making a small donation to help defray the cost of hosting and bandwidth.

Please do not PM me for support or "how to" requests -- please post your request in the forum so that everyone may assist you and everyone can benefit from the answer to your question!  Thanks! Smiley
CaptainHappy
NLG Site Administrator
NLG Site Administrator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 622
Offline Offline

Gender: Male
Posts: 3203


I haven't met a Jackpot that I didn't like!!!
« Reply #4 on: August 07, 2009, 08:26:58 AM »
Quote from: knagl on August 07, 2009, 06:10:57 AM
Quote from: ashyron on August 07, 2009, 01:23:53 AM
I just want something to cover the keyholes.

Ron-

A friend of mine came across some plastic plugs at a local surplus store.  They look like the type of plugs that would go into an office chair or a cheap desk to cover the screws.  They're perfect for the keyholes, though.  Here are a couple of pictures of the things, plus a visual of one of them installed in one of my machines:


knagl,

You beat me to suggesting those.  I was going to suggest something like that, but you came in with pictures and confirmation that they work! Good Job!!! applause applause applause We used to use something similar on our industrial computers as temporary dust caps on much larger holes. I know that Home Dump and Lowes(t)(<----- poking fun at one of their commercials!) carry them, just not sure of the sizes. Also there are some similar plugs in the electrical department also. I suggest bringing a picture to take with you as that really helps it click in their minds when you ask about where something more obscure is. Also may want to check the diameter of the hole before you go to get them. If the hole is a "D" hole, we used to trim the straight side of the round insert of the plug. (For a Double "D" hole (Round with two parallel straight edges) we used to get very excited we just trimmed both sides. (I just had to us "DD" HA HA!)  rotflmao

CaptainHappy  CaptainHappy
Logged
  Come sail away, Come sail away Come sail away with me..
jay
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 483
Offline Offline

Gender: Male
Posts: 3178


if you cant afford to lose you cant afford to win
« Reply #5 on: August 07, 2009, 08:42:28 AM »
I think you can also get those in phoa crome or at the very least you can get crome spray paint and give the ones you got a quick blast.
Logged
The only way to beat the casino is to own it
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #6 on: August 07, 2009, 07:13:50 PM »
You can use a ¾" chrome metal hole plug from Ace Hardware.
« Last Edit: August 07, 2009, 07:26:00 PM by OhioGaming » Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #7 on: August 07, 2009, 07:23:25 PM »
Quote from: OhioGaming on August 07, 2009, 07:13:50 PM
You can use a ¾" chrome metal hole plug from Ace Hardware.

I thought of this as well but even bending the prongs I couldn't get it to work so now I have a bent up hole plug in my garage.  It collects dust.  bust gut laughing bust gut laughing

Quote from: knagl on August 07, 2009, 06:10:57 AM
Quote from: ashyron on August 07, 2009, 01:23:53 AM
I just want something to cover the keyholes.

Ron-

A friend of mine came across some plastic plugs at a local surplus store.  They look like the type of plugs that would go into an office chair or a cheap desk to cover the screws.  They're perfect for the keyholes, though.  Here are a couple of pictures of the things, plus a visual of one of them installed in one of my machines:

/quote]

Thanks for the pics.  I will have to check around and see if I can find something like this.
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #8 on: August 07, 2009, 07:28:50 PM »
I don't take good pictures but is this what you are looking for? They are chrome plated and look better than what they do in the picture.

* hole plug.jpg (113.48 KB, 634x588 - viewed 360 times.)
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #9 on: August 07, 2009, 07:33:16 PM »
Quote from: OhioGaming on August 07, 2009, 07:28:50 PM
I don't take good pictures but is this what you are looking for? They are chrome plated and look better than what they do in the picture.

Those look like they are made to go in the keyhole.  Is that correct??  Those look great.
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
OhioGaming
Contributing Gold NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 297
Offline Offline

Posts: 834



WWW
« Reply #10 on: August 07, 2009, 07:38:59 PM »
Yes, they fit the hole on the side of the door where a lock would go.
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #11 on: August 10, 2009, 08:57:25 PM »
I got ordered what I need.  Thanks to everyone that responded and helped.
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
pinballmike49
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 47
Offline Offline

Gender: Male
Posts: 196


slots,slots and more slots
« Reply #12 on: August 11, 2009, 12:44:06 AM »
Ron the chrome squares you are looking for appeared to come out of a IGT S-2000. I just set up two of these machines for multi-denom and removed the chrome squares. The squares measure  1 1/4  x 1 1/4 inch. If this works let me know, its a free be...Mike.
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #13 on: August 11, 2009, 05:13:23 PM »
Quote from: pinballmike49 on August 11, 2009, 12:44:06 AM
Ron the chrome squares you are looking for appeared to come out of a IGT S-2000. I just set up two of these machines for multi-denom and removed the chrome squares. The squares measure  1 1/4  x 1 1/4 inch. If this works let me know, its a free be...Mike.

Mike, I'm sending a PM now.
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
pinballmike49
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 47
Offline Offline

Gender: Male
Posts: 196


slots,slots and more slots
« Reply #14 on: August 11, 2009, 09:19:06 PM »
Ron I checked my Pay Pal no address listed for you. Drop me a line with your address and I'll ship out tomorrow. Don't worry about postage its on me..Mike.
Logged
pinballmike49
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 47
Offline Offline

Gender: Male
Posts: 196


slots,slots and more slots
« Reply #15 on: August 12, 2009, 09:21:37 PM »
Ron your package was mailed off this date USPS. Should see same Friday or Monday, have fun...Mike.
Logged
ashyron
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 255
Offline Offline

Gender: Male
Posts: 964


RIP Dad. I love you. 5-26-10


WWW
« Reply #16 on: August 12, 2009, 11:05:28 PM »
Quote from: pinballmike49 on August 12, 2009, 09:21:37 PM
Ron your package was mailed off this date USPS. Should see same Friday or Monday, have fun...Mike.

Thanks Mike.   I owe you.  Will look for it in my mail at the end of the week.
Logged
Well, it's been almost 2 years.  I'm kinda back. Undecided
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.093 seconds with 20 queries.