Welcome, Guest. Please login or register.
November 21, 2024, 09:13:15 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  General NLG Chat
| |-+  The Slot Shop **Tech Talk**
| | |-+  DIY LCD Kit info needed		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: DIY LCD Kit info needed  (Read 5443 times)
MrBellMan
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 153
Offline Offline

Gender: Male
Posts: 692


Wild Thing!
« on: August 15, 2009, 09:43:40 PM »
Hi all,

I came across this LCD/Touch screen kit (see pics) and was curious to know if anyone has any info on it? It appears to be home made and complete, but I'm not sure how I would plug it into one of my I Games (19 pin).

I know nothing about this and I'm mot even sure if it works. Anyone have any info on the pin outs or info at all?

Thanks,

Rob

* IMG_3232.JPG (353.16 KB, 1600x1200 - viewed 370 times.)

* IMG_3234.JPG (227.19 KB, 1600x1200 - viewed 333 times.)
Logged
MrBellMan
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 153
Offline Offline

Gender: Male
Posts: 692


Wild Thing!
« Reply #1 on: August 15, 2009, 09:44:06 PM »
Two more pics...

* IMG_3235.JPG (231.81 KB, 1600x1200 - viewed 384 times.)

* IMG_3236.JPG (364.07 KB, 1600x1200 - viewed 350 times.)
Logged
fiddlefarter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 52
Offline Offline

Gender: Female
Posts: 124
« Reply #2 on: August 17, 2009, 12:33:36 AM »
This monitor is familiar I have repaired them before but have no schematics, I will have a look at one of mine and see if I can help. Is the monitor powering up ?
Logged
MrBellMan
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 153
Offline Offline

Gender: Male
Posts: 692


Wild Thing!
« Reply #3 on: August 17, 2009, 12:37:53 AM »
Thanks for the reply,

Since I have nothing to plug it into (matching plug wise), I'm not sure if it will power up or not. I was hoping someone recognized the hardware and would be able to tell me how to change the pin configuration or perhaps have an adapter for an I-Game 19 pin.

Rob
Logged
fiddlefarter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 52
Offline Offline

Gender: Female
Posts: 124
« Reply #4 on: August 17, 2009, 12:41:26 AM »
No worries I will check the pin outs on mine and get back to you tomorrow
Regards Sharron
Logged
fiddlefarter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 52
Offline Offline

Gender: Female
Posts: 124
« Reply #5 on: August 20, 2009, 12:37:49 AM »
I have searched my workshop for a similar LCD and it seems pixies have taken the boards and left me with the frame. From memory the monitor runs from
a standard VGA (pin outs can be obtained from the net), I would remove the cable that is there and make my own. I believe that this monitor is powered via external DC power supply, (12V DC or 24V DC) which looks like it is to the right of the touch screen board, (check + and -). The 2 wires coming from the touch screen assembly you will find are tapping into 12V at some point on the board. I will have a really good look around and see what else I can find there seems to be no service info on this model. I test all of my LCD's using a VGA cable that is run off my computer, and have at least 2 power supply units always on.

Regards Sharron
Logged
MrBellMan
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 153
Offline Offline

Gender: Male
Posts: 692


Wild Thing!
« Reply #6 on: August 21, 2009, 01:39:37 AM »
Thanks for the info and please let me know if you find any thing else useful.

Rob
Logged
fiddlefarter
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 52
Offline Offline

Gender: Female
Posts: 124
« Reply #7 on: August 24, 2009, 01:21:31 AM »
It is very frustrating to know that I have worked on that unit and to see the case and boards missing  hissy fit, if I do find anything I will post it for you

Regards Sharron
Logged
vtyler
New NLG Member 1 to 100 Post
**

Total Karma Storms: 32
Offline Offline

Posts: 97
« Reply #8 on: August 20, 2011, 02:01:54 AM »
sorry for resurrecting a old topic but i actually have been working with one of these LCD for a project of mine and i do have a pin-out for everything but the touch controller if it is still needed
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.092 seconds with 19 queries.