NLG Wireless access

[Joeylc]

* Support for WAP, WAP2 and I-mode protocols.
    * Browse through boards/topics/messages with reduced page size.
    * Ability to login and logout (not with WAP).
    * Ability to see new topics/boards with new replies.
    * Ability to jump to first unread reply.
    * Ability to Post new messages (not with WAP).

Add one of the following after index.php in the address:
?wap2
?wap
?imode

That will bring up the mobile pages   

Code:

http://newlifegames.net/nlg/index.php?wap2

Let us know how you are using it 

Enjoy:  Joeylc

[Joeylc]

Wireless Device Support

Some mobile devices have the ability to connect to the internet (using GPRS, 1X, HSDPA, etc.); however, mobile devices are most often not equipped with advanced browsers like desktop computers. Therefore, only a limited set of HTML is supported, defined by several mobile internet protocols. NLG supports three protocols commonly used by wireless devices: WAP, WAP 2, and i-mode.

NLG Feature Support 

The following features are supported: 

Feature   WAP WAP 2 I-mode
Display boards and categories         WAP WAP 2 I-mode
Display topics and posts            WAP WAP 2 I-mode
Login and logout                     WAP 2 I-mode
Distinguish new/read topics          WAP 2 I-mode
Create and Reply to topics          WAP 2 I-mode
Read and send personal messages     WAP 2 I-mode
View unread posts since last visit     WAP 2 I-mode
View new replies to your posts        WAP 2 I-mode

You can only login with WAP 2  or I-mode 

Please consult the manual for your wireless device to see which protocol or protocols it supports.

Usage

NLG support of wireless protocols is always enabled.
The WAP, WAP 2, and i-mode protocols can be accessed by adding
?wap, ?wap2, or ?imode respectively to the forum's URL. For example:

* http://newlifegames.net/nlg/index.php?wap
* http://newlifegames.net/nlg/index.php?wap2
* http://newlifegames.net/nlg/index.php?imode


An automatic detection of the protocol is attempted. Entering the Forum URL without any parameters should be sufficient to show the Forum in the proper protocol.