S6000 - error after RAM CLEAR

[FOXSSLOTS1]

using new Ram clear - did the clear - got the CL C - lights flashing indcating clear worked.  . Removed  clear chips - reinstalled game chips - restart reels spin as normal then I get a "10.28" in the Win Paid window with the "10" flashing - the Credit window shows 09. 3.  anyone?

[a69mopar]

Hi Barry,
  That's just the date, which seems to be correct.  From left to right Month, Day, Year, Day of week.  press max credits to move , spin to change value, the second set in the time.  Press change/service to exit.

Thanks,
Wayne

[FOXSSLOTS1]

I am usual pretty good at catching codes - I really missed this one.  Fantastic - KARMA to you and thanks for ALL your help.

SUCCESS - sure is nice to push a button and have something that has been a pain - WORK.

[a69mopar]

I wish they all were so easy.

w

[toftof]

Hi All,

I'm french & my english is not great !!
I have a S6000 bally ( triple 7 ) five line
and yesterday I switch on the slot but it doesn't want to receive the coin
it doesnt' work !! : (
I heard a " bip "
and in the windows win paid I can see one time " 2.4. " and one time " 5.0."
the problem is that I don't know the process to cancel this error
may be somebody can help me !! I saw that you seems to be very professional
take care
best regards 

[a69mopar]

Bonjour  toftof, I'd type in French but it's not good.

   Code 24 is coin in reverse, which can be caused by dirt or debris in the area of the optic block (behind the optics).  If cleaning the optics and prism doesn't help then there may be a problem with the optic board itself.  Try cleaning it then closing the door, open the door again and close again.

Merci,
Wayne 

[toftof]

thanks Wayne !
I will try as soon as possible
take care

[toftof]

hi wayne,

I cleaned the optics ( I think it should be conparator coin ! )
after I did a reset as I can see in the video

now, when I put a coin there is nothing in the credit windows however the coin seems to be in the good way !
what are you think about it ??

thanks & best regards

[a69mopar]

The optics I was referring to are below the comparitor, here is a picture.

Thanks,
Wayne

[toftof]

thanks wayne
I will check it
best regards

[toftof]

Hi Wayne
I cleaned the optic, but message 2.4. come back
what I havez to do now? buy a new optic?
if yes do you one to sell

thanks & regards

[toftof]

Hi Wayne,

I'm the french again !!

I clean the optic
I do A ram clear with eproms U23 & U48
but I the error code 24 come again

the coin go in the good way, but the belt stay at zero & I can't play

is it normal that the green led is off on the coin comparator?
can I play with out optic coin ?

thanks for your help

best regards

 

[a69mopar]

Hi toftof,
 
   You most likely need a new coin optic board or at least the chip on it.

Thanks,
Wayne

[toftof]

Hi Wayne,

do you know where I can get it ? website address where I can order?

is it possible to play without optic coin?

thanks for your help

NB: is it your car on the picture?

[a69mopar]

Try Jim at Blueridge Slots (link at top of page) for the optic board.  You can unplug the optics and coin comparitor(harness connector) and play on bills only.  The error should not return without them hooked up.

Yes that's my car and I love it!

Thanks,
Wayne

[toftof]

Hi Wayne, thank you for your help. I love american cars & yours seems to be a good car.
I don't have bill acceptor !!
regards