HOW I CHANGE MY .25 CENTS SLOT TO A .05 CENT

[mysticlamp69]

ITS A BALLY 6000. CAN SOMEONE HELP THANKS

[a69mopar]

This should be in the Bally section and will be moved there.

To change a Bally .25 machine to .05 machine, assuming it takes coins, you would need a nickel shelf wheel, the quarter pinwheel should be o.k., however if you're buying the shelf wheel they likely have a pinwheel to go with it, a nickel coin optic block and a nickel to put into the comparitor as well as the decals to change on the machine. the quarter coin head should be fine, however you can buy a coinback if you wish it to be correct.  As far as the programming, it is a dipswitch change that will require a saferam clear.  If the machine is coinless, then all you need are the decals and to change the dip switch...


Thanks,
Wayne

[mysticlamp69]

Thanks
My machine is a coinless slot, How do I clear it? Where can I get the instructions?


Thanks again

[a69mopar]

I did a video to show a partial saferam clear, for a full clear you will need to hold the pseudo coin and test button in while booting the machine.  for nickels the DS2 dips 1-4  would be on, off, off, off
 <a href="http://www.youtube.com/v/fJ-yRz4AnYc&rel=0" target="_blank">http://www.youtube.com/v/fJ-yRz4AnYc&rel=0</a>

Thanks,
Wayne

[a69mopar]

do you have saferam clear chips?  If not, check with Jim at blueridgeslots, I know he has them, If you're in Canada, let me know.

Thanks,
Wayne

[mysticlamp69]

Thanks Wayne,

Where can I get those clear chips??



Thanks -Jesus

[mysticlamp69]

Wayne,

Am in California thanks.
I will look for those chips. thanks.



Thanks -Jesus

[a69mopar]

Wayne,

Am in California thanks.
I will look for those chips. thanks.



Thanks -Jesus

this is a link to Jim's (Blueridgeslots) profile, if you contact him he can provide the chips.  http://newlifegames.net/nlg/index.php?action=profile;u=76


Thanks,
Wayne

[mysticlamp69]

Hello Wayne,


I just got the clear chips. I have a few questions, hope you can help me out.

Do I need to do a full clear? At the same time do I switch on, off, off, off?
Please let me know step by step.


Thank You -Jesus

[blueridgeslots]

Who did you get them from, we supply instructions with ours!

[mysticlamp69]

I got them from Jimmy Rudenski.

[a69mopar]

Hello Wayne,


I just got the clear chips. I have a few questions, hope you can help me out.

Do I need to do a full clear? At the same time do I switch on, off, off, off?
Please let me know step by step.


Thank You -Jesus

change the dips to on, off, off, off, then follow the video but hold the test and pseudo coin buttons while you turn it on.

W
<a href="http://www.youtube.com/v/fJ-yRz4AnYc&rel=0" target="_blank">http://www.youtube.com/v/fJ-yRz4AnYc&rel=0</a>

[mysticlamp69]

Hello Wayne,

Thanks,

I follow your instruction, but after reinstalling the original chips I get message (83F0).
Do you have any idea what that means.


Thank You -Jesus

[a69mopar]

83F-0 =  Invalid SafeRAM EPROM ---Wrong EPROM's used for SafeRAM Clear., or in other words, your saferam chips are not new enough for your mains.  What mains do you have.

w

[mysticlamp69]

Hello Wayne,

How can I id thed mains?


I have U20 & U18.



Thank You -Jesus

[a69mopar]

U18 and U20 are personality chips, U28 and U43 are the mains.  They should be labeled, however you should try to get the newest saferam clear chips and they will work for older mains also. I know Jim at Blueridge will have them.

Thanks,
Wayne

[mysticlamp69]

Thanks Wayne,


I will get a new set of clear chips.



Thank You -Jesus