Welcome, Guest. Please login or register.
November 24, 2024, 01:07:14 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Progressive Controllers, Displays and Slot Toppers
| |-+  TOP THIS!!! Slot Topper Topic!
| | |-+  Schematic for a Double Diamond Run Topper - New Problem (03/05/10)-Bulbs burnt 		0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Schematic for a Double Diamond Run Topper - New Problem (03/05/10)-Bulbs burnt  (Read 9826 times)
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« on: December 24, 2009, 04:25:29 PM »

As I stated in my last post, I replaced the lights with #658 Miniature bulbs (14 Volts/.08 Amp).

Last weekend, I let the topper stay on for about two hours, and one by one each of the light bulbs burnt out?

The transformer reads 241-6-28 with output voltage 28 VAC @ 1.1A.

Do I need high amp bulbs? or can anyone give me ideas on what to look for??

Any ideas would be appreciated.

Thanks in advance.   Help

--------------------------------------------------------------------------------

* Dec 24, 2009 002.jpg (327.28 KB, 1280x960 - viewed 336 times.)

* Dec 24, 2009 001.jpg (323.06 KB, 1280x960 - viewed 337 times.)
« Last Edit: March 05, 2010, 02:27:52 PM by John0813 » Logged
morspeed
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 470
« Reply #1 on: December 24, 2009, 06:10:00 PM »
That is really funny. I was bidding on this with you but It seemed like you really wanted it so I let it go. HA HA What a coincidence!  I did notice that the arrow did not light but figured I could get it to work. I see a transformer in there that is probably what will power those leds. Check to see how much power it is giving and work from there. Is there any control board hooked to the lights behind the arrow?
Tommy
Logged
morspeed
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 12
Offline Offline

Gender: Male
Posts: 470
« Reply #2 on: December 24, 2009, 06:12:27 PM »
I just noticed those are bulbs not LEDS. Trace the wires from the lights out. It seems like a lot of wires are loose and not hooked up. This is probably because this was a low voltage set up that he turned into 120V Plug and play. I can't really help too much without a better look.
Logged
StatFreak
rotaredoM etiS GLN labolG
Global NLG Site Moderator
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 756
Offline Offline

Gender: Male
Posts: 8549


Warning! Spammers will be eaten, with relish!
« Reply #3 on: December 24, 2009, 06:27:37 PM »
Please do not place duplicate posts on multiple boards. Our regular members generally read all posts, regardless of where they are placed, and if members begin helping on both threads it becomes difficult to keep track of the troubleshooting process.

If you are unsure where to place the post, just use your best judgment, and a moderator or admin will move the thread to the appropriate board if necessary.

I gave you and morspeed a K+, and I hope you get your topper working.  propeller

Thanks,

StatFreak garfield
nlg  Global Moderator





MODERATOR NOTE: Deleted duplicate post and moved active thread to topper board.
Logged
I found myself at NLG garfield  ..but got lost again on the way home. Scratch Head 2
If found, please email me to myself. Thanks. yes
       Executive member in good standing of Rick's SMAA.                              Ehhh...What's Up Doc?
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #4 on: December 24, 2009, 06:45:53 PM »
Sure we could help with some better pics

 Rudolph Lites Lites Lites Lites Rudolph
Logged
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« Reply #5 on: December 25, 2009, 12:55:16 PM »
Thanks for the information about the double posts.

Here are a few more photos....I hope they help...I have checked for loose wires....What about the two wires not connected?? any idea where they connect??


Thanks

* Dec 25, 2009 001.jpg (332.71 KB, 1280x960 - viewed 317 times.)
Logged
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« Reply #6 on: December 25, 2009, 12:57:24 PM »


Here are two more photos

* Dec 25, 2009 002.jpg (329.4 KB, 1280x960 - viewed 306 times.)

* Dec 25, 2009 003.jpg (345.09 KB, 1280x960 - viewed 325 times.)
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #7 on: December 25, 2009, 02:08:23 PM »
It appears to me that the brown and red wires went to
some bulbs or LED board that surrounded the edges of the topper?
When you power on the topper, stick a multimeter on
those two wires and see what's coming out of them.
Logged
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #8 on: December 25, 2009, 03:35:48 PM »
Sb...If you look close at the black box (low voltage controller) The two wires seem to be theinput  for it, and it controlls the arrow lights.

It shows 12-24 vdc or ac but my question is, would that be theinput  voltage, would get other ideas first.  Maybe a web search on the controller will help us, Don't need any holiday smoke.      

     Anthony

*****   correction******

SB    the more I look at it you are correct,didn't pay attention to the transformer in the pic.     Looks like it did have chaser lights at one time
« Last Edit: August 17, 2010, 11:05:02 PM by Railroad94 » Logged
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« Reply #9 on: December 25, 2009, 04:09:26 PM »

Sorry that the low voltage controller photo is fuzzy.

The info reads:  Model: Chase 004D, Voltage: 12 to 24 VAC or DC, Current 3.2A Max.
                       Tech 22, Carlsbad, California           

The red light on it is not lite...no power.

 Idea: I have a Sony ac power adaptor which reads: Output: DC12V  80mA... could that be used to connect to the two wires and power the controller?

* Dec 25, 2009 - PM 003.jpg (307.3 KB, 1600x1200 - viewed 308 times.)
Logged
Railroad94
In Remembrance of our lost NLG Members
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 225
Offline Offline

Gender: Male
Posts: 585
« Reply #10 on: December 25, 2009, 04:57:04 PM »
As SB stated,they look to be output power wires for chaser lights that are no longer there. Looking at the chrome cover you can see the holes for the LEDs

Looks like power for the controller and arrow lights come from the small metal transformer in the pics.


The transformer looks to be marked for 24 vac and one leg going to the lights and the other for the controller.

Do you have power coming off the transformer? What bulb numbers do you have
« Last Edit: December 26, 2009, 02:24:16 AM by Railroad94 » Logged
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« Reply #11 on: December 25, 2009, 05:11:29 PM »

The outside of the topper has chaser lights which someone connected directly to a 110 wall plug.

The fluorescent light also is powered this way...only the arrow is not working...
Logged
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« Reply #12 on: December 28, 2009, 11:28:41 AM »


Does anyone know if I can use a Sony ac power adaptor (to connect to the two wires) which reads: Output: DC12V  80mA. to power just the low voltage controller and get the lights to work????????????????????????..
Logged
stayouttadabunker
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1039
Offline Offline

Gender: Male
Posts: 13447
« Reply #13 on: December 28, 2009, 02:05:46 PM »
Not if the lights require DC current...
Logged
John0813
NLG Member 101 to 500 Post
***

Total Karma Storms: 4
Offline Offline

Gender: Male
Posts: 186
« Reply #14 on: December 29, 2009, 05:10:17 PM »

Thanks to everyone, especially railroad94.....

I tested the wires and found power was going to the controller...it turns out that all 10 bulbs were burned out...they have been replaced and everything is working.....


 Clap applause
Logged
Bettor Slots
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 751
Offline Offline

Gender: Male
Posts: 1946



WWW
« Reply #15 on: December 29, 2009, 06:43:50 PM »
 applause

Always happy to hear when something comes together.  How about posting some pics of the finished product on that fancy machine of yours.  yes
Logged
If life is like a box of chocolates....why do I always seem to end up with the butter creme?
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.1 seconds with 19 queries.