Welcome, Guest. Please login or register.
October 31, 2024, 09:18:40 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT S and S-plus Reel Games. (Moderator: knagl)
| | |-+  Modifying the top box
0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Modifying the top box  (Read 1823 times)
Magicslots
Contributing NLG Member
Sr.NLG Member 501 to 1000 Post
*

Total Karma Storms: 62
Offline Offline

Gender: Male
Posts: 810



« on: February 03, 2010, 11:52:54 PM »

I am trying to figure out how to mount my Spectrum progressive display on my machine, I need
to get a ribbon cable, a couple of 2 wire power molex lines, and my candle wires through the top.
 bawling  There is no way its all gonna fit through the little candle hole drilled in the metal top.
So I am open to suggestions.  Enlarge the hole? drill another? cut a wide enough slot?

  Also I am curious about opinions of the better versions of molex pin removal tools.
As I am going to have to do a little rewiring, or  make an extension harness. Scratch Head
Logged

"Any man who is under 30, and is not a liberal, has no heart; and any man who is over 30, and is not a conservative, has no brains."  (Sir Winston Churchill)
Foster
The S2000 GURU
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 345
Offline Offline

Gender: Male
Posts: 2872



« Reply #1 on: February 04, 2010, 04:59:15 AM »

My S+ is a Round top so this may not work for you

The hole in mine is larger than the spacing of the two screws that hold the candle on the machine.
If the S+ 9" and 16" tops are like my S2000 9" top that hole is about 7/8"

I did the moles first.
Once that ribbon cable is in place, I do not think the molex can fit through the hole.
I gently pushed the narrow end of the ribbon connector through allowing the cable to wrap around the connector until the connector clears the hole.
Logged

A Slot Machine and Coca-Cola Addict!!
"If it is not broke do not fix it" I keep forgetting that!
Pages: [1] Go Up Print 
« previous next »
Jump to:  


If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com    Newlifegames.net    Newlifegames.org
   New Life Games    NewLifeGames  NLG  We Bring new Life to old Games    1-888-NLG-SLOTS
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.073 seconds with 19 queries.