Welcome, Guest. Please login or register.
November 21, 2024, 11:26:37 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  Arcade Games, Pinball, Crane Games, Redemption Games and Other Stuff
| |-+  Other Arcade Games
| | |-+  Cherry Master Help		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: Cherry Master Help  (Read 8080 times)
TastyHoagie
Guest
« on: February 04, 2010, 07:28:18 PM »
Hello,

 I have a table top cherry master with screen problems. I am looking to buy this machine but don't know if it is going to cost a lot in parts. I am skilled but was wondering on difficulty level and if any special tools are required. Thanks For the help! TH

* Cherry_Master_Problems.jpg (164.35 KB, 1275x1650 - viewed 388 times.)
Logged
partytime
Guest
« Reply #1 on: February 05, 2010, 02:13:31 AM »
You need to change the monitor..........
Logged
TastyHoagie
Guest
« Reply #2 on: February 06, 2010, 02:25:36 AM »
Thanks for the reply,

I was thinking  that....

So I want to go install a  square15" LCD flat panel. I am good at fabrication so fitment wont be an issue.

 Do I take out the whole tube/chassis assemble and discard?

Most important what kind of card do I need? Any hot leads on where to get one?

Thanks!

TastyHoagie
Logged
partytime
Guest
« Reply #3 on: February 06, 2010, 03:51:53 AM »
Ebay has the cga to vga cards the re is a post on here about it......
Logged
Slot Docs
Contributing Gold NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 118
Offline Offline

Gender: Male
Posts: 177


Slot Docs (Buddy) (940) 389-4212 Cell
« Reply #4 on: February 06, 2010, 04:16:35 AM »
you need a CGA for the cherry master and most of the lcd displays are backward compatible which means they should run on CGA mode
but I would check to make sure with the one you decide to by as not all of them will.
Slot Docs
Logged
asgard
New NLG Member 1 to 100 Post
**

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 91


Gaming Machine Owner / Operator
« Reply #5 on: June 27, 2010, 02:38:21 AM »
Quote from: TastyHoagie on February 04, 2010, 07:28:18 PM
Hello,

 I have a table top cherry master with screen problems. I am looking to buy this machine but don't know if it is going to cost a lot in parts. I am skilled but was wondering on difficulty level and if any special tools are required. Thanks For the help! TH

You just have to change one of the three color drivers on the neck board, they're so cheap I just change all three (red, blue and green)
Logged
TastyHoagie
Guest
« Reply #6 on: June 28, 2010, 08:01:05 PM »
Any instructions on driver replacement?I can see um and understand about the tube voltage ...etc Thanks!
Logged
asgard
New NLG Member 1 to 100 Post
**

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 91


Gaming Machine Owner / Operator
« Reply #7 on: July 01, 2010, 09:10:22 PM »
The three black transistors on the bottom left are the color drivers, just desolder and replace.

Pic : http://arcarc.xmission.com/Pinball/Web%20Archives/www.Marvin3m.com%20(Sep-08-2003)/pin2000/monitor3.jpg
Logged
TastyHoagie
Guest
« Reply #8 on: July 02, 2010, 12:21:15 AM »
 Thanks for all the help

 please see the pic are these the drivers highlighted in red?

  they on the  on the back of the monitor tube correct? sorry for the ignorance  Thanks! Mike

* cm.JPG (62.56 KB, 540x418 - viewed 330 times.)
Logged
asgard
New NLG Member 1 to 100 Post
**

Total Karma Storms: 9
Offline Offline

Gender: Male
Posts: 91


Gaming Machine Owner / Operator
« Reply #9 on: July 02, 2010, 12:34:56 AM »
correct !
Logged
TastyHoagie
Guest
« Reply #10 on: July 03, 2010, 12:54:28 AM »
Thank you for all the help the Part # is c1507  (with e19  printed on top) it looks like a small heat sink bolts on to each one any Idea where I can find them I have had no luck, Thanks Tasty Hoagie
Logged
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.086 seconds with 20 queries.