Bally 5500 ProSlot reel strips placement?

[stayouttadabunker]

Hi,
I am playing with a Bally5500 ProSlot "Double Jackpot Blazing 7's".
It has a real cool award glass with shadow lights behind it that light up
the "1st, 2nd, 3rd coin" and the "2,000, 5,000, 10,000" award inserts.
It has a 3 line reel glass.
For the life of me, I cannot get the reel strips to line up right on the reels.
It pays out on weird amounts that don't match the glass.

The SMI is: 6975.
I'm not sure what that matches up "E" chip-wise.
I looked on the MGC Approved website PDF and found a E697511X-05 Double JP.
Could this be it?


The numbers on the strips look like they've been printed by
a backwards and upside down printer!?  
Anyways, I used a mirror and got these numbers off of them>>>
M923-2343
M923-2344
M923-2345

If anyone can tell me if these are the right chips and strips for this glass below -
that would a great help!
 Thanks!
 

[a69mopar]

I'll check later if no one has.

W

[a69mopar]

Hi Mark,
   I would guess your chip to be: Blazing Triple Sevens Double Jackpot      7902   E697511X-05      12.5   92.7   10000   3L3C,  which would make the SMI 7902.  How did you come up with the SMI number?  Are your strips installed withthe notches at upright?  What sort of pays are you encountering?

[stayouttadabunker]

I pushed the test button and that (6975) was one of the first numbers to come up....
I thought it was the SMI number but I guess not  
after that ,
the percentage (I think it was 92. point something percent )  
Then a slightly different percentage number comes up
and so on...the thing doesnt really stop like an S+ does...
you have to use the max bet button to pause it...argh!!!

I'm wondering if the strip numbers match this game and glass?
The belly glass has three flaming 7's behind the Double Jackpot symbol.

[a69mopar]

Hi Mark, That would give you the part number EXXXX11x-05 = E697511X-05.  I have some of these, but they may be stacked.  I will try to find out tomorrow.

 The game is called "Double Jackpot Triple Blazing Sevens"  The strips have two notches in them, they should be marked for slant and upright, make sure they are in the upright location.

Thanks,
Wayne

[stayouttadabunker]

Yes,
I did notice that they had 2 notches....
I thought that was a great idea.
Why they print strips numbers backwards and
upside down is another issue though...lol

[a69mopar]

Hi Mark,
   Did you get this figured out?  The machine I have is a little too far back in the sea of machines for me to pull the reels right now, but if noone else can help, I'll see when I can move them all to get to it.

Thanks,
Wayne

[stayouttadabunker]

Not yet W.
I will get back to it on Monday...
In another thread, I had found out I have a bad power supply so I ordered one from a friend out in Ohio.
I really want to get this puppy going too because it has cool lights up there behind the award glass.
Don't go busting your B.'s moving machines around for me...
I'll figure it out more when I attack it some more next week! 
There's no rush.

[stayouttadabunker]

I wanted to update this old post...
I threw in the new power supply and it works like a charm!
The strips I got from r273 are perfect as well!
Here's a short clip of it in action!>>>
<a href="http://www.youtube.com/v/QYBIqGzf6u0&rel=0" target="_blank">http://www.youtube.com/v/QYBIqGzf6u0&rel=0</a>