Welcome, Guest. Please login or register.
November 21, 2024, 09:17:44 PM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Reel Slots** Gaming Machines
| |-+  IGT M Slot Reel Games
| | |-+  Help Is This M slot??		 0 Members and 1 Guest are viewing this topic. « previous next »
Pages: 1 [2] Go Down Print
Author Topic: Help Is This M slot??  (Read 25018 times)
BillMc52
Guest
« Reply #25 on: October 08, 2010, 06:54:30 PM »
Quote from: Jim on March 02, 2010, 12:22:21 PM
I agree with ROCKET,   the coin in gives it away, they were backlit coin in assemblies, if there are two boards above the reel assembly behind a door then its a M model,  if it has the board located under the reel assembly,on the left side , then its a M+ model.

You are missing the reel kicker assembly, Gordy may have these parts, the wheel on the end of these usually breaks and the reels won't reset,also the ribbon cable has cold solder joints where it attaches to the connector.


Jim  

Jim, you seem to have knowledge of theseM-model machines.  I have one and the wheel for kicker assembly for reel 1 has just shattered.  Any thoughts as to where I may be able to get just the wheel?
« Last Edit: October 08, 2010, 07:32:40 PM by StatFreak » Logged
Jackpot
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 124
Offline Offline

Gender: Male
Posts: 195


I buy-Sell-Restore & have parts for older slots


WWW
« Reply #26 on: October 30, 2011, 11:03:34 PM »
Yes, that is a "M" index lever assembly, do you still need one? and do you still need a manual? I can also email a PDF manual to you if needed.
Jackpot

"M", is for I.G.T. mechenical Slot, or Massive sized reels!  spam spam Nerd
Logged
Visit us at http://www.coinslots.com
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #27 on: October 28, 2012, 01:57:23 PM »
I am a Newbee,, and dont know if iam in the right place or not..But i just bought a IGT machine and it has error code 61 on it.. does anyone know whtat that means?   its  IGT HAYWIRE..MANUfactured 9-25-93  Serial # 376751  Model # B5036CIW..Is there anyway i could find a manuel on it too?
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #28 on: October 28, 2012, 05:38:42 PM »
Quote from: Bluidbirdie on October 28, 2012, 01:57:23 PM
I am a Newbee,, and dont know if iam in the right place or not..But i just bought a IGT machine and it has error code 61 on it.. does anyone know whtat that means?   its  IGT HAYWIRE..MANUfactured 9-25-93  Serial # 376751  Model # B5036CIW..Is there anyway i could find a manuel on it too?
Yours, is a S-PLUS? Open door and press white test button, should ding and change to a 61-1, then close door and turnjackpot key one time.
Logged
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #29 on: October 28, 2012, 11:25:16 PM »
Quote from: coorslight115 on October 28, 2012, 05:38:42 PM
Quote from: Bluidbirdie on October 28, 2012, 01:57:23 PM
I am a Newbee,, and dont know if iam in the right place or not..But i just bought a IGT machine and it has error code 61 on it.. does anyone know whtat that means?   its  IGT HAYWIRE..MANUfactured 9-25-93  Serial # 376751  Model # B5036CIW..Is there anyway i could find a manuel on it too?
Yours, is a S-PLUS? Open door and press white test button, should ding and change to a 61-1, then close door and turnjackpot key one time.
  Well thank you for that info.. but it looks like the white button has been disconnected ..no wires on it.  has some kind of other gadget on the door.. and there is to wires sticking out the side ..they are green /green yellow...i will try to come up with some more info when i figure out what goes to what.. oh yea i dont see no jackpot key either.. maybe that what i need too.
Logged
coorslight115
Contributing NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 79
Offline Offline

Gender: Male
Posts: 2602
« Reply #30 on: October 28, 2012, 11:30:14 PM »
Quote from: Bluidbirdie on October 28, 2012, 11:25:16 PM
Quote from: coorslight115 on October 28, 2012, 05:38:42 PM
Quote from: Bluidbirdie on October 28, 2012, 01:57:23 PM
I am a Newbee,, and dont know if iam in the right place or not..But i just bought a IGT machine and it has error code 61 on it.. does anyone know whtat that means?   its  IGT HAYWIRE..MANUfactured 9-25-93  Serial # 376751  Model # B5036CIW..Is there anyway i could find a manuel on it too?
Yours, is a S-PLUS? Open door and press white test button, should ding and change to a 61-1, then close door and turnjackpot key one time.
  Well thank you for that info.. but it looks like the white button has been disconnected ..no wires on it.  has some kind of other gadget on the door.. and there is to wires sticking out the side ..they are green /green yellow...i will try to come up with some more info when i figure out what goes to what.. oh yea i dont see no jackpot key either.. maybe that what i need too.

We need lots of pictures......
Logged
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #31 on: October 31, 2012, 10:25:46 PM »
Ok i took some pics hope they come thru.

* DSC02272.JPG (1281.64 KB, 2048x1536 - viewed 519 times.)

* DSC02250.JPG (1249.29 KB, 2048x1536 - viewed 508 times.)
Logged
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #32 on: October 31, 2012, 10:29:33 PM »
Dam it only took two pics..

* DSC02260.JPG (1272.96 KB, 2048x1536 - viewed 475 times.)

* DSC02257.JPG (1274.63 KB, 2048x1536 - viewed 506 times.)
Logged
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #33 on: October 31, 2012, 10:31:22 PM »
more pics

* DSC02261.JPG (1275.05 KB, 2048x1536 - viewed 515 times.)

* DSC02270.JPG (1192.16 KB, 2048x1536 - viewed 544 times.)
Logged
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #34 on: October 31, 2012, 10:36:15 PM »
No i don't know what iam doing but i am trying...lol Crazy

* DSC02263.JPG (1290.6 KB, 2048x1536 - viewed 479 times.)

* DSC02265.JPG (1295.03 KB, 2048x1536 - viewed 529 times.)
Logged
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #35 on: November 02, 2012, 06:23:08 PM »
Quote from: Bluidbirdie on October 31, 2012, 10:25:46 PM
Ok i took some pics hope they come thru.
  can someone look at my pics...the little white button has been diconnected.. and there is some other wiring mechanism on the door..is this where i need to reset the error code 61?  please bare with me cause i dont know exactly what i am doing but iam trying..
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #36 on: November 02, 2012, 09:26:43 PM »
Hi Bluidbirdie! Ok, the white button that Coorslight was referring to is not the one in your picture. The one you're looking for is much smaller (maybe 1/8" wide at the MOST)! It should be located near the power switch. When you hold it for 2-3 seconds maybe more (with the power on), you should hear a "DING".

Report back after the DING and we'll work on the next step.

Roslyn
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #37 on: November 03, 2012, 04:38:25 PM »
   Ok i didnt get a ding but i got the error code 61  1  this time.. Silly Me!
Logged
CVslots
Contributing Gold NLG Member
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 432
Offline Offline

Gender: Male
Posts: 2803



WWW
« Reply #38 on: November 03, 2012, 05:24:04 PM »
Quote from: coorslight115 on October 28, 2012, 05:38:42 PM
Quote from: Bluidbirdie on October 28, 2012, 01:57:23 PM
I am a Newbee,, and dont know if iam in the right place or not..But i just bought a IGT machine and it has error code 61 on it.. does anyone know whtat that means?   its  IGT HAYWIRE..MANUfactured 9-25-93  Serial # 376751  Model # B5036CIW..Is there anyway i could find a manuel on it too?
Yours, is a S-PLUS. Open door and press white test button, should ding and change to a 61-1, then close door and turnjackpot key one time.

As Coorslight said previously, now we need to close the door and turn the jackpot key ONE time. (The jackpot key is up above the handle of the machine. Uses the little brass key.)
Logged

www.CentralValleySlots.com
Email: centralvalleyslots@yahoo.com
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #39 on: November 05, 2012, 03:11:50 PM »
That must be the key switch that is not there... it only has two wires with connectors sticking out.. i have a pic of it on my profile.
Logged
Jackpot
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 124
Offline Offline

Gender: Male
Posts: 195


I buy-Sell-Restore & have parts for older slots


WWW
« Reply #40 on: November 05, 2012, 03:35:23 PM »
Quote from: Bluidbirdie on November 05, 2012, 03:11:50 PM
That must be the key switch that is not there... it only has two wires with connectors sticking out.. i have a pic of it on my profile.

Maybe shut and close the door, then touch the Jackpot key wire together for a second. Need a new key lock and key for it? I can send you one if needed, just PM me.
Jackpot
Logged
Visit us at http://www.coinslots.com
Bluidbirdie
New NLG Member 1 to 100 Post
**

Total Karma Storms: 0
Offline Offline

Gender: Female
Posts: 10
« Reply #41 on: November 30, 2012, 10:12:55 PM »
Well this  is getting more of a mess as i look into it.. i found out there is no speaker in there so there for no ding frying pan..i do hear the dollar accepter grind its wheels but wont take no dollar bills and see two lite sensors on it....looks like iam missing some parts for sure.. i will keep looking.. hissy fit  thanks.
Logged
Pages: 1 [2] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.134 seconds with 20 queries.