Welcome, Guest. Please login or register.
June 18, 2024, 10:20:15 AM

Login with username, password and session length
* Home Help Arcade Login Register
.
+  Forum
|-+  **Video Slots** Gaming machines
| |-+  WMS WILLIAMS. (Moderator: tacman)
| | |-+  WMS 550 and WBA set up SOLVED...THANKS JIM !		 0 Members and 2 Guests are viewing this topic. « previous next »
Pages: [1] Go Down Print
Author Topic: WMS 550 and WBA set up SOLVED...THANKS JIM !  (Read 6450 times)
cp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 165
Offline Offline

Posts: 423
« on: June 28, 2010, 12:23:43 PM »
Working on a 550 Williams video upright.  ( Reel Em In / single screen ).    I installed an  LCD monitor.  After clearing,  my WBA  will not cycle.  The 2 small  led lights on the  WBA are lit.  I have a known good  I/O.  Dip switches  1  & 2 are all off (  no jumpers )

  Posting a picture of the Screen showing that the machine has a  jcm  145/146  installed Scratch Head

As I remember,  some of the 550 's  had a small board attached in the  Bill Validator wiring harness.   This machine has no board.  Doesn't look like one was ever mounted on the back side of the  cash can BV  assembly.  

Any ideas or help would be appreciated.  

* wheels 011.jpg (121.8 KB, 640x480 - viewed 227 times.)
« Last Edit: June 28, 2010, 01:48:12 PM by cp » Logged
blueridgeslots
703 730-0821
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1262
Offline Offline

Gender: Male
Posts: 1779


703 730-0821


WWW
« Reply #1 on: June 28, 2010, 12:33:54 PM »
If there is no comm board behind the housing it needs an RS-232 board on the side of the WBA
Logged
Selling Quality Tested and Guaranteed Slot Parts and Machines at Wholesale

http://stores.ebay.com/BLUE-RIDGE-SLOT-SERVICE
Buzz
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1158
Offline Offline

Gender: Male
Posts: 4641
« Reply #2 on: June 28, 2010, 01:00:30 PM »
Which one does it have, A WBA or JCM ? Scratch Head Scratch Head
Logged
NLGs Motto  " IF IT AIN'T BROKE GIVE ME TIME IT WILL BE "
cp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 165
Offline Offline

Posts: 423
« Reply #3 on: June 28, 2010, 01:04:51 PM »
WBA  13  installed.  ....there is a  very small board attached to the  left / bottom (plug-in) side of the  WBA... perhaps it is not a "good"  board ??   I'll pull the board off and install it in another  WBA.

Pulled the small (RS-232 )board off the WBA that came with machine ... re-installed on another WBA...  It initialized and now is working !   

THANKS JIM  ...  YOU  DA  MAN ! ! 
« Last Edit: June 28, 2010, 01:51:36 PM by cp » Logged
cp
Contributing NLG Member
NLG Member 101 to 500 Post
*

Total Karma Storms: 165
Offline Offline

Posts: 423
« Reply #4 on: June 28, 2010, 02:32:56 PM »
For some reason,  I thought the  RS232  was the board BEHIND  the BV enclosure / case.

 ( My "original"  WBA 13  with the RS232 board attached must have had an issue from the git-go )

Attached picture of   Service/ Revision screen now...

* wheel2.jpg (119.97 KB, 640x480 - viewed 262 times.)
Logged
blueridgeslots
703 730-0821
Senior Full time Member.
Sr.Tech NLG Member 1000+ Post
*

Total Karma Storms: 1262
Offline Offline

Gender: Male
Posts: 1779


703 730-0821


WWW
« Reply #5 on: June 28, 2010, 02:42:01 PM »
Quote from: cp on June 28, 2010, 02:32:56 PM
For some reason,  I thought the  RS232  was the board BEHIND  the BV enclosure / case.

 ( My "original"  WBA 13  with the RS232 board attached must have had an issue from the git-go )

Attached picture of   Service/ Revision screen now...

It is, that is a WMS product, the one on the side of the BV is a JCM product, either one will work, just easier having in the game, the earlier cabinets had the bv mounted one, later ones the cabinet one, never use both, try a different eprom in the 13 that doesn't work, possibly bad or wrong software, btw WMS is not the only manufacturer that uses the RS-232, the reason it came up after clear is the BV wasn't found, same thing would happen if it was removed when cleared, the 145 was just the default with that O/S, glad it worked out
Logged
Selling Quality Tested and Guaranteed Slot Parts and Machines at Wholesale

http://stores.ebay.com/BLUE-RIDGE-SLOT-SERVICE
Pages: [1] Go Up Print 
« previous next »
Jump to:  

SimplePortal Classic 2.0.5

If you find this site helpful, Please Consider Making a small donation to help defray the cost of hosting and bandwidth.



Newlifegames.com ™    Newlifegames.net ™    Newlifegames.org ™
   New Life Games ™    NewLifeGames ™  NLG ™ We Bring new Life to old Games ™    1-888-NLG-SLOTS ™
Are all Copyright and Trademarks of New Life Games LLC 1992 - 2021


FAIR USE NOTICE:

This site contains copyrighted material the use of which has not always been specifically authorized by the copyright owner.
We make such material available in an effort to advance awareness and understanding of the issues involved.
We believe this constitutes a fair use of any such copyrighted material as provided for in section 107 of the US Copyright Law.
In accordance with Title 17 U.S.C. Section 107, the material on this site is distributed without profit to those
who have expressed a prior interest in receiving the included information for research and educational purposes.

For more information please visit: http://www.law.cornell.edu/uscode/17/107.shtml.

If you wish to use copyrighted material from this site for purposes of your own that go beyond fair use,
you must obtain permission directly from the copyright owner.

NewLifeGames.net Web-Site is optimized for use with Fire-Fox and a minimum screen resolution of 1280x768 pixels.


Powered by SMF 1.1.20 | SMF © 2013, Simple Machines
Loon Designed by Mystica
Updated by Runic Warrior
Page created in 0.095 seconds with 18 queries.