GameKing Touch Screen replacment

[lizzo54]

HI All,

I have a new problem that occurred the other night, I cracked my touch screen on my 13" Gameking CRT.   I installed a new tube and was attempting to remove the old touch screen and it cracked BAD.   So I posted a WTB a few days back but haven't gotten any response.  Thought maybe someone here could point me in the right direction for replacing this.   My other 2 video slots are Williams and they have a different setup.   This is Microtouch, the sticker on the cable says  R2.6 098-97; the print on the cable says CSA LL81295 I/II A SR-PVC 80 C  300v FTI 26AWG.

This machine is a 97-98 aged machine if that helps.  I do note that this has a circuit board with chips mounted next to the CRT that the touch screen plugs into( the WMs machine I have have the small white boxes) .   

Thanks, Lenny

[kforeman]

damn i hate it when that happens!! 

locating a curved touch screen is becoming more and more difficult.  3M stopped producing them awhile back so what's already out there is it from them.  AG&E distributes Optera brand screens that supposedly replace many of the 3M and Touch International curved screens; i haven't seen them so i can't vouch for quality or how well they actually fit.  you have posted a WTB but maybe you should try contacting some of the sellers directly, maybe they missed your post?  eBay would be another avenue i would explore, you never know what's on there.  i wish i could help but we haven't had 13" CRT's on my floor for about 6 years so all the spare brand new touch screens were tossed in the dumpster around that time.     good luck in tracking one down!

[blueridgeslots]

HI All,

I have a new problem that occurred the other night, I cracked my touch screen on my 13" Gameking CRT.   I installed a new tube and was attempting to remove the old touch screen and it cracked BAD.   So I posted a WTB a few days back but haven't gotten any response.  Thought maybe someone here could point me in the right direction for replacing this.   My other 2 video slots are Williams and they have a different setup.   This is Microtouch, the sticker on the cable says  R2.6 098-97; the print on the cable says CSA LL81295 I/II A SR-PVC 80 C  300v FTI 26AWG.

This machine is a 97-98 aged machine if that helps.  I do note that this has a circuit board with chips mounted next to the CRT that the touch screen plugs into( the WMs machine I have have the small white boxes) .   

Thanks, Lenny

I think we have one